Illumination shall be provided at ramps, bridgeplates, doorways, and boarding and alighting areas in accordance with T503....
Search Results "Clear Floor Area"
-
T503.1 General
-
C. Doors
interior routes described above: ...with the exception of doors at shallow closets, do the doors to required accessible spaces, and all doors into and within guestrooms allow at least 32" clear...
-
11B-1008.2.4.2 Elevated
The clear width of accessible routes connecting elevated play components shall be 36 inches (914 mm) minimum....
-
11B-233.3.1.2.6.5 Additional requirements.
1. Grab bar reinforcement complying with Sections 11B-809.10.5.2, 11B-809.10.6.4, or 11B-809.10.7.3. 2. Interior door opening width complying with Section 11B-404.3.1. 3....
-
Access Board: Accessible Route Clear Width
This video is part of a longer animation produced by the U.S. Access Board. View the animation video in its entirety on the Access Board's website...
-
Part 1. Typical Issues for Voters Who Use Wheelchairs, Scooters or Other Mobility Aids
Typical Issues for Voters Who Use Wheelchairs, Scooters or Other Mobility Aids There must be at least one exterior accessible route that connects accessible passenger drop-off areas,...
-
1008.2.4.2 Elevated
The clear width of accessible routes connecting elevated play components shall be 36 inches (915 mm) minimum. EXCEPTIONS: 1....
-
11B-1008.2.4.2 Elevated
The clear width of accessible routes connecting elevated play components shall be 36 inches (914 mm) minimum. Exceptions: 1. ...
-
11B-1008.2.4.2 Elevated
The clear width of accessible routes connecting elevated play components shall be 36 inches (914 mm) minimum. Exceptions: 1....
-
1008.2.4.2 Elevated
The clear width of accessible routes connecting elevated play components shall be 36 inches (915 mm) minimum. EXCEPTIONS: 1....
-
1008.2.4.2 Elevated
The clear width of accessible routes connecting elevated play components shall be 36 inches (915 mm) minimum. EXCEPTIONS: 1....
-
Accessible Routes Throughout the Museum
If a person must make a turn in the route, the minimum clear passage width is shown in Figures (a) and (b). Elevators serving public spaces must remain operable....
-
4.33.4 Surfaces
The ground or floor at wheelchair locations shall be level and shall comply with 4.5....
-
4.33.4 SURFACES
The ground or floor at wheelchair locations shall be level and shall comply with 4.5....
-
1017.3 Clear Tread Width
This section requires the clear tread width of trails to be 36 inches minimum....
-
1011.2.4 Openings
This section requires openings in the clear ground space such as drainage grates to not allow passage of a sphere more than 1/2 inch in diameter....
-
4.3.5 Turning clearance
T shaped space is not included here because it can be derived from the 90-degree turn to establish the width of the arms of the T and the clear floor space to determine the length of each...
-
Inpro Corporation JointMaster® 103 Series-VCT Expansion Joint Systems
Benefits Seals absorb limited serviceable seismic movement Frames allow for a smooth transition over joint for wheeled equipment Designed for 1/8" (3mm) thick flooring...
-
Bus Shelter Benches
The clear space within the shelter is required to accommodate wheelchair users....
-
1011.2.4 Openings
Openings in the clear ground space surface shall not allow the passage of a sphere more than 1/2 inch (13 mm) in diameter. Advisory 1011.2.4 Openings. ...
-
1011.2.4 Openings
Openings in the clear ground space surface shall not allow the passage of a sphere more than 1/2 inch (13 mm) in diameter. Advisory 1011.2.4 Openings....
-
§ 38.153(c)(1)
(1) Doors shall have a minimum clear width when open of 30 inches (760 mm), measured from the lowest step to a height of at least 48 inches (1220 mm), from which point they may taper to...
-
Inpro Corporation JointMaster® 441 Series-Recessed Mount Expansion Joint
Anodized, brushed or bead blast cover plate finishes available Exposed fastener for easy maintenance Key Specifications Floor/Floor, Floor/Wall Conditions...
-
810.2.4 Slope
Parallel to the roadway, the slope of the bus stop boarding and alighting area shall be the same as the roadway, to the maximum extent practicable....
