[2010 ADA Standards] 233.2 Residential Dwelling Units Provided by Entities Subject to HUD Section 504 Regulations....
Search Results "Proposed Standard"
-
11B-233.2 Reserved
-
11B-224.1 General
[2010 ADA Standards] 224.1 General. Transient lodging facilities shall provide guest rooms in accordance with 224. Advisory 11B-224.1 General....
-
Toilet Paper Dispensers
In the 1991 Standards the location of the toilet paper dispenser is determined by the centerline and forward edge of the dispenser....
-
225.2.1 Storage
Under the 1991 Standards, only one locker of each type provided must be accessible....
-
R104.2 MUTCD
Guidance, option, and support statements, as defined in section 1A.13 of the MUTCD, shall be used to assist in the interpretation of the standard statements....
-
A. Title III of the ADA and its Implementing Regulations
design or construct facilities, or make alterations to the maximum extent feasible, that are “readily accessible to and usable by individuals with disabilities . . . in accordance with standards...
-
A.5 - Are there regulations implementing Section 508?
Access Board Standards....
-
Physical Accessibility
work that began on public schools on or after March 15, 2012, the 2010 ADA Standards for Accessible Design (2010 ADA Standards) apply.112 However, when a public school is required to...
-
Are handrails required in elevator cars?
The ADA Standards do not require handrails in elevators cars....
-
Ground Surfaces: ADA Standard Section 1008.2.6
Ground surfaces must be inspected and maintained regularly to ensure continued compliance with the ASTM F 1951 standard....
-
IV. SPECIFIC RELIEF
References to “Standards” in this Agreement refer to the 2010 ADA Standards for Accessible Design (“Standards”)....
-
LIMITATION ON BARRIER REMOVAL OBLIGATIONS
§36.304(g)(1) The requirements for barrier removal under §36.304 shall not be interpreted to exceed the standards for alterations in subpart D of this part....
-
Clear Floor or Ground Space and Turning Space
This guide explains requirements in the ADA Standards for clear floor or ground space and turning space....
-
§ 35.151(b)(4)(ii)(C) Safe harbor
If a public entity has constructed or altered required elements of a path of travel in accordance with the specifications in either the 1991 Standards or the Uniform Federal Accessibility...
-
ARGUMENT
The revisions to the ADA Standards for Accessible Design do not change the outcome here because the 2010 Standards regarding public entrances are intended to achieve the same result as the...
-
11B-406 Curb ramps, blended transitions and islands
[2010 ADA Standards] 406 Curb Ramps ETA Editor's Note The differences between 2010 ADA Standards Section 406 and CBC Section 11B-406 are numerous, as indicated by the italicized...
-
218 and 810 Transportation Facilities
The 2010 Standards at sections 218, 810.5, 705.1, and 705.2 only require detectable warnings at transit platform edges....
-
New construction and alteration requirements
The ADA requires that newly constructed facilities, first occupied on or after January 26, 1993, meet or exceed the minimum requirements of the ADA Standards for Accessible Design (Standards...
-
[2010 ADAS] 105.2.3 ASTM
F 1292-99 Standard Specification for Impact Attenuation of Surface Systems Under and Around Playground Equipment 11B-1008.2.6.2 F 1292-04 Standard Specification...
-
ASTM
-04: Standard Specification for Impact Attenuation of Surface Systems Under and Around Playground Equipment 11B-1008.2.6.2 F1487-01: Standard Consumer Safety Performance Specification...
-
904 Sales and Service Counters
height of check-writing surfaces, where provided, is to comply with the height of work surfaces addressed in section 902.3 (34 inches maximum), consistent with the Board’s intent in the proposed...
-
405 Ramps
The final rule, consistent with the proposed rule, specifies only that the maximum slope shall be 1:12. Comment....
-
Residential Facilities
After the compliance date for the 2010 Standards, state and local governments will no longer have the option of complying with the UFAS, but will have to use the 2010 Standards for new construction...
- CalCasp Training: Advanced Scoping