Like many other facilities designed to be accessible, accessible toilet facilities can and do serve a wide range of individuals with and without disabilities....
Search Results "Accessible Seating"
Commonly Searched Documents
-
General
- Access Board: Multi User Toilet Room Layout
-
11B-402.2 Components
Accessible routes shall consist of one or more of the following components: walking surfaces with a running slope not steeper than 1:20, doorways, ramps, curb ramps excluding the flared...
-
6.1 General
Beach access routes complying with 6.0 shall be provided at developed beach sites as required by 6.0. Beach access routes shall be permanent or removable surfaces....
-
11B-203.10 Raised refereeing, judging, and scoring areas
Raised structures used solely for refereeing, judging, or scoring a sport shall not be required to comply with these requirements or to be on an accessible route....
- Access Board: Accessible Route Carpet
-
11B-206.2.1 Site arrival points
At least one accessible route shall be provided within the site from accessible parking spaces and accessible passenger loading zones; public streets and sidewalks; and public transportation...
-
Ask Questions and Provide Instructions
You can ask for and carrier personnel must be able to provide information about aircraft accessibility, seating and movable armrests, lavatory accessibility, boarding options, and storage...
-
Where Required: Site Arrival Points [§206.2.1]
Where Required: Site Arrival Points [§206.2.1] This guide explains scoping and technical requirements for accessible routes in the ADA Standards. ...
-
4.2 Physical Accessibility Barriers and Solutions
Parking spaces are too narrow Use cones and/or tape and temporary signs to mark additional parking spaces Restripe parking area to include ADAAG required widths for accessible...
- Bridge Multimedia - Universally Accessible Media
-
M303.2.2 Width
Wheelchair spaces shall be 36 inches (915 mm) wide minimum. EXCEPTION: Wheelchair spaces located on raised platforms shall be permitted to be 32 inches (815 mm) wide minimum to a...
-
M303.3.1 Vertical
Changes in level of ¼ inch (6.4 mm) high maximum shall be permitted to be vertical.
-
M303.3.2 Beveled
Changes in level between ¼ inch (6.4 mm) high and ½ inch (13 mm) high maximum shall be beveled with a slope not steeper than 1:2.
-
M303.2.4 Equipment Clearances
Where wheelchair spaces are entered from the rear and includes space beneath components, wheelchair spaces shall include knee and toe clearances complying with M303.2.4.1 for breast...
-
M303.1 General (Section-by-Section Analysis)
This is an introductory section.
-
CHAPTER 6: WHEELCHAIR SPACES AND SECUREMENT SYSTEMS
[See subsections ...]
-
M303.2.4 Knee and Toe Clearance
Wheelchair spaces shall include knee and toe clearance complying with M303.2.4. The depth of the wheelchair space shall include knee and toe clearance of 17 inches (430 mm) minimum...
-
M303.2.4.1 Toe Clearance
Toe clearance shall be provided at a height of 9 inches (230 mm) above the floor to a depth of 6 inches (150 mm) maximum.
-
M303.3.1 Vertical
Changes in level of ¼ inch (6.4 mm) high maximum shall be permitted to be vertical.
-
M303.3.2 Beveled
Changes in level between ¼ inch (6.4 mm) high and ½ inch (13 mm) high maximum shall be beveled with a slope not steeper than 1:2.
-
M303.2.4.2 Knee Clearance
Knee clearance shall be provided at a depth of 11 inches (280 mm) minimum and 25 inches (635 mm) maximum at 9 inches (230 mm) above the floor and at a depth of 8 inches (205 mm)...
-
B. Agreement of the Parties
For purposes of this order, Ellerbe shall calculate sight lines for wheelchair seating locations as described in the Department of Justice publication entitled "Accessible Stadiums."...
-
F226.1 General
Where dining surfaces are provided for the consumption of food or drink, at least 5 percent of the seating spaces and standing spaces at the dining surfaces shall comply with 902....