Curb ramps or blended transitions complying with R304 shall connect the access aisle to the pedestrian access route. Curb ramps are not permitted within the access aisle....
Search Results "Pedestrian Elements"
-
R310.3 Access Aisle
-
§35.150(d)(2)
) If a public entity has responsibility or authority over streets, roads, or walkways, its transition plan shall include a schedule for providing curb ramps or other sloped areas where pedestrian...
-
4.6.2 Location
In parking facilities that do not serve a particular building, accessible parking shall be located on the shortest accessible route of travel to an accessible pedestrian entrance of the...
-
Wheelchair
A device, including one that is battery-powered, that is designed solely for use by a mobility-impaired person for locomotion and that is suitable for use in an indoor pedestrian area. ...
-
§ 35.150(d)(2)
) If a public entity has responsibility or authority over streets, roads, or walkways, its transition plan shall include a schedule for providing curb ramps or other sloped areas where pedestrian...
-
305.5 Position
Unless otherwise specified, clear floor or ground space shall be positioned for either forward or parallel approach to an element....
-
§ 1194.21(e)
(e) When bitmap images are used to identify controls, status indicators, or other programmatic elements, the meaning assigned to those images shall be consistent throughout an application...
-
Obstructions
An obstruction is any element that violates the protruding object requirements of TAS 204 and 307. ...
-
R405 Knee and Toe Clearance (Section-by-Section Analysis)
R405 Knee and Toe Clearance (Section-by-Section Analysis) The technical requirements for knee and toe clearance apply where space beneath an element is included as part of the clear space...
-
R405.2.1 General
Space under an element between the finish surface and 230 mm (9 in) above the finish surface shall be considered toe clearance and shall comply with R405.2....
-
Chapter R3: Technical Requirements (Section-by-Section Analysis)
Chapter R3: Technical Requirements (Section-by-Section Analysis) Technical requirements specify what design criteria elements, spaces, and facilities must comply with in order to be considered...
-
2. Protruding Objects
Accessible element or space ANSI A117.1 section APPLICATION 2....
-
12. Seating, tables, or work surfaces
Accessible element or space ANSI A117.1 section APPLICATION 12....
-
609.5 Surface Hazards
Grab bars and any wall or other surfaces adjacent to grab bars shall be free of sharp or abrasive elements and shall have rounded edges....
-
Sec.36.607(a)(1)
(1) A certification shall be considered a certification of equivalency only with respect to those features or elements that are both covered by the certified code and addressed by the standards...
-
§ 36.606(a)(1)
(1) A certification shall be considered a certification of equivalency only with respect to those features or elements that are both covered by the certified code and addressed by the standards...
-
4.1.6(1)(f)
(f) No new accessibility alterations will be required of existing elements or spaces previously constructed or altered in compliance with earlier standards issued pursuant to the Architectural...
-
Forward Reach [§308.2]
Forward Reach [§308.2] The range for unobstructed reaches (15” – 48”) applies only to those portions of elements that are operable....
-
Section 4.1.6, Alterations (Section-By-Section Analysis and Response to Comments)
First, if any existing element or space is altered, the altered element or space must meet new construction requirements (section 4.1.6(1)(b))....
-
11B-305.5 Position
Unless otherwise specified, clear floor or ground space shall be positioned for either forward or parallel approach to an element....
-
306.2.1 General
Space under an element between the finish floor or ground and 9 inches (230 mm) above the finish floor or ground shall be considered toe clearance and shall comply with 306.2....
-
§ 1194.22(l)
(l) When pages utilize scripting languages to display content, or to create interface elements, the information provided by the script shall be identified with functional text that can be...
-
405.1 General
EXCEPTION: In assembly areas, aisle ramps adjacent to seating and not serving elements required to be on an accessible route shall not be required to comply with 405....
-
§ 1194.21(k)
(k) Software shall not use flashing or blinking text, objects, or other elements having a flash or blink frequency greater than 2 Hz and lower than 55 Hz....