seats by section 221.2.3.1 of the 2010 Standards and have seating encircling, in whole or in part, a field of play or performance area shall disperse wheelchair spaces and companion seats around...
Search Results "Clearance Around Base"
-
11B-221.6 Semi-ambulant seats
-
11B-221.6 Semi-ambulant seats
seats by section 221.2.3.1 of the 2010 Standards and have seating encircling, in whole or in part, a field of play or performance area shall disperse wheelchair spaces and companion seats around...
-
Accessible Route to Dumpster and Enclosure
This would trigger: a level area outside the gate to accommodate the door maneuvering clearance, operable door/gate hardware, clear width at doorway, and compliant closer speed...
-
Edge Protection
Toe clearance must be at least 30 inches wide and a minimum of 9 inches above the ground or deck surface beyond the railing....
-
226.1 General
However, employers should consider work surfaces that are flexible and permit installation at variable heights and clearances....
-
Locating Controls & Devices: Percent of People Who Can Reach the Matrix Cell Indicated While Holding No Weight - Forward Approach Manual Wheelchair
reaching over an obstruction in relation to the forward-most point, and the negative range implying that the reach target is brought closer to the person (such as on a table with knee clearance...
-
Locating Controls & Devices: Percent of People Who Can Reach the Matrix Cell Indicated While Holding 5 lb Weight - Forward Approach Scooter
reaching over an obstruction in relation to the forward-most point, and the negative range implying that the reach target is brought closer to the person (such as on a table with knee clearance...
-
Locating Controls & Devices: Percent of People Who Can Reach the Matrix Cell Indicated While Holding No Weight - Forward Approach Power Chair
reaching over an obstruction in relation to the forward-most point, and the negative range implying that the reach target is brought closer to the person (such as on a table with knee clearance...
-
Landings [§405.7]
Handrails, edge protection, vertical posts and other elements cannot obstruct or overlap the minimum 60” by 60” clearance....
-
4) Medical or health care facilities
Required clearances in rooms exceed ADAAG requirements. No special, less stringent requirements for alterations (§6)....
-
Hager Companies Door Pull 974B
Door Pull Pull Material:- Brass, bronze, stainless steel Base Material:- Black anodized aluminum ...
-
Work Areas (Section-By-Section Analysis and Response to Comments)
This approach was based on the theory that, as long as an employee with disabilities could enter the building and get to and around the employment area, modifications in a particular work...
-
1009.5.2 Transfer Space
A transfer space of 60 inches (1525 mm) minimum by 60 inches (1525 mm) minimum with a slope not steeper than 1:48 shall be provided at the base of the transfer platform surface and shall...
-
Are charging parties protected from retaliation?
Even if an individual has already filed a charge of discrimination, s/he can file a new charge based on retaliation....
-
219 Assistive Listening Systems
Section 219.3 specifies the minimum number of receivers according to a sliding scale based on the seating capacity of the assembly area....
-
§ 36.208(b)
(b) In determining whether an individual poses a direct threat to the health or safety of others, a public accommodation must make an individualized assessment, based on reasonable judgment...
-
§ 36.303(d)(1)
real-time communication with individuals using auxiliary aids and services, including text telephones (TTYs) and all forms of FCC-approved telecommunications relay systems, including Internet-based...
-
Exits
Exits Scoping for entrances is based in part on the number of exits required by the applicable building or life safety code....
-
§100.500 Discriminatory effect prohibited.
[78 FR 11482, Feb. 15, 2013] Liability may be established under the Fair Housing Act based on a practice's discriminatory effect, as defined in paragraph (a) of this section, even if...
-
4. Changes Made to the Proposed Rule
The proposed rule was based on the report of a regulatory negotiation committee. We released a draft of the final rule in 2009....
-
2.3.2
The acceptable tools should be selected based on the accuracy required and a reasonable balance between the accuracy of the tool and the time, cost, and experience required for measurement...
-
Original research for ANSI A117.1 (1957 - 1961)
A117.1 - 1961, American National Standard Specifications for Making Buildings and Facilities Accessible to, and Usable by, the Physically Handicapped, ramps were assessed for flatness based...
-
§ 35.139(b)
(b) In determining whether an individual poses a direct threat to the health or safety of others, a public entity must make an individualized assessment, based on reasonable judgment that...
-
§ 35.161(b)
provide effective real-time communication with individuals using auxiliary aids and services, including TTYs and all forms of FCC-approved telecommunications relay system, including Internet-based...
