Immdediate FloorPro® results establish your field credibility with the builders. Reduces Test Time The FloorPro® rolls under its own power at 40 ft....
Search Results "BHMA: Builders Hardware Manufacturers Association"
-
Ytterberg Scientific Inc. FloorPro® Floor Flatness Measurement Device
-
Side reach (Section-by-Section Analysis)
The association of property managers pointed out that the revised side-reach requirement provided a reasonable approach to ‘‘regulating elevator controls and all other operable parts'' in...
-
Side reach (Section-by-Section Analysis)
The association of property managers pointed out that the revised side-reach requirement provided a reasonable approach to ‘‘regulating elevator controls and all other operable parts'' in...
-
Designed and Constructed for First Occupancy (Preamble, Section-by-Section Analysis)
First, it is helpful for designers and builders to have a fixed date for accessible design, so that they can determine accessibility requirements early in the planning and design stage....
-
Designed and Constructed for First Occupancy (Section-By-Section Analysis and Response to Comments)
First, it is helpful for designers and builders to have a fixed date for accessible design, so that they can determine accessibility requirements early in the planning and design stage....
-
Inpro ENDURANT® Shower Receptors
Standard sizes available starting at 32" x 32" or can custom manufacture up to a maximum size of 60"" x 72" (or 30 sq.ft.)...
-
Inpro ENDURANT® Velox™ Trench Receptor
Product Information Manufactured with BioPrism® Solid Surface, an industry leading bioresin blend that is antimicrobial and non-porous to prevent the growth of mold and mildew....
-
Tile Tech Pavers® Stamp-Tech™ Series Pavers
Stamp-Tech™ pavers can be manufactured in wide range of designs and sizes in addition to endless colors & aggregate mixes....
-
Issue 11: Good vibrations (vibrotactile indications)
If the arrow is attached with glue, as found on some manufacturers’ APS, too much glue under the arrow can prevent the vibration of the arrow....
-
4.1.1 Range of Examination Table and Chair Configurations
Manufacturers design examination chairs that have, as their primary function, the support of patients in a seated or semi-supine position....
-
5.2.1.4 Transfer Surface Size Recommendations for Imaging Equipment (M301)
Manufacturers must determine the location of the transfer surface to facilitate the patient’s transfer and positioning for the clinical functions of the diagnostic procedure....
-
SUMMARY OF THE 19-INCH RECOMMENDATION
equipment by those individuals Carefully balance the costs to hospitals, physicians, and other health care providers of replacing or modifying existing equipment together with manufacturer...
-
5.4.3 Transfer Support Height for M301 and M302
Manufacturers of such equipment on the committee determined that this recommendation did not conflict with IEC 60601-2-52, allowing equipment to be designed to provide both accessibility...
-
Electric Bicycles
"(15) Because many State statutes limit speeds to 32 km/h (20 mi/h), manufacturers generally design and govern their electric bicycles to match this speed....
-
Lift Compatibility (M301.4 and M302.4)
Manufacturers of portable floor lifts usually recommend that the lifts be used with the legs extended in the widest position to maintain stability when lifting and lowering patients....
-
LaCantina Aluminum Thermally Controlled Slider System
one piece handle and lock with exterior key Standard two point lock system secures large sliding panels with locking hardware located on the primary sliding panel System...
-
LaCantina Multi-slide Thermally Controlled Aluminum Sliding Door System
one piece handle and lock with exterior key Standard two point lock system secures large sliding panels with locking hardware located on the primary sliding panel System...
-
Providing Comforts and Conveniences—Constructed Features
Construction Tip Determine if features are really accessible Manufacturers don't necessarily understand accessibility requirements....
-
Changes in Level and Horizontal Gaps
The American Railway Engineering and Maintenance of Way Association had previously recommended a new platform height of 8 inches above top of rail....
-
Security (where access is controlled by security personnel and screening devices)
GSA and associated building security personnel reserve the right to inspect Segway devices upon entrance to a Federal building. ...
-
Q2.) What are the types of “field conditions” that were anticipated where the advisory says “tolerances recognized by this provision include those for field conditions”?
Many industry associations publish materials that specify what can be expected from their members. Those are usually the dimensions that can safely be considered industry tolerances. ...
-
11B-202 Existing buildings and facilities
For example, an HVAC replacement project may require incidental electrical work as well as incidental support and anchorage work associated with the HVAC equipment....
-
R209 Accessible Pedestrian Signals and Pedestrian Pushbuttons (Section-by-Section Analysis)
Technical assistance and training on the installation of accessible pedestrian signals and pedestrian pushbuttons is available from the Access Board and transportation industry professional associations...
-
E.1. - What steps does the FAR require an agency to take when acquiring EIT?
(See sections F and G below for further discussion on nonavailability, undue burden and other exceptions, and associated contract file documentation requirements)....
