Series Push Pad Door Exit Devices For 1-3/4" Narrow, Medium, and Wide Stile Aluminum, Wood or Hollow Metal Doors "Soft-Touch" Smooth Action Push-Pad Field Sizable Standard Door Height...
Search Results "Grab Bar Height"
Filters
Commonly Searched Documents
-
CRL Jackson 1200 Series Push Pad Door Exit Devices
-
Vertical Alignment-Crest Vertical Curves
The minimum length for a crest vertical curve is a function of the stopping sight distance, the algebraic difference in the upgrade and downgrade grades, the assumed height of an object...
-
Healthcare Stories - Jennifer Thomas Part 2 of 2
Requires the Registered User plan or above. Login! -
Healthcare Stories - Jennifer Thomas Part 1 of 2
Requires the Registered User plan or above. Login!
-
H3
., lever, pull, panic bar) usable with one hand without tight grasping, pinching, or twisting of the wrist?...
-
[2010 ADAS] 105.2.2 ASME
The enclosure walls not used for entry or exit are required to have a grab bar the full length of the wall on platform lifts....
-
[2010 ADAS] 105.2.2 ASME
The enclosure walls not used for entry or exit are required to have a grab bar the full length of the wall on platform lifts....
-
Adjustable gap protocol
The platform height remained level with their WMD seat height. ...
-
Serving Counters
Serving Counters Where food or drinks are served at counters and the counter height is more than 34 inches above the floor, providing a lowered section of the serving counter at least...
-
11B-1009.5.4 Transfer steps
Transfer step height shall be 8 inches (203 mm) maximum. The surface of the bottom tread shall extend to a water depth of 18 inches (457 mm) minimum below the stationary water level....
-
MEASUREMENT TECHNIQUE
MEASUREMENT TECHNIQUE The depth and width are measured along the centerlines of the seat, and the height from the floor to the highest point of the transfer surface: The depth...
-
1009.5.4 Transfer Steps
Transfer step height shall be 8 inches (205 mm) maximum....
-
1132A.4, Item 3
., concrete, brick, flagstone) may have a maximum change in height from the interior landing of 4 inches (101.6 mm)....
-
§ 38.53(d)(1) Requirements
vehicles shall be coordinated with the boarding platform design such that the horizontal gap between each vehicle door at rest and the platform shall be no greater than 3 inches and the height...
-
3) Signs
rooms and spaces (men's and women's rooms; room numbers; exit signs) must have raised and Brailled letters; must comply with finish and contrast standards; and must be mounted at a certain height...
-
Ferno's EZ Glide® Evacuation Stair Chair
The 5 position lift bar and handles and superior maneuverability, help any size operator navigate over all types of surfaces, down stairs, through tight spaces and on to safety....
-
11B-803.1 General
Section 11B-903.5 requires dressing room bench seats to be installed so that they are at the same height as a typical wheelchair seat, 17 inches (430 mm) to 19 inches (485 mm)....
-
11B-603.5 Accessories
ETA Editor's Note The CBC 11B-603.5 limitation on the height of accessories at toilet rooms is more stringent than 2010 ADA Standards....
-
Addition
An expansion, extension, or increase in the gross floor area or height of a building or facility....
-
106.5.3 Addition
An expansion, extension, or increase in the gross floor area or height of a building or facility....
-
Charts, diagrams and illustrations
“Bar Chart. Figures for Head Pats, Ear Scratches and kisses climb steadily during the week from a few on Monday to around 5-6 on Thursday....
-
Addition
An expansion, extension, or increase in the gross floor area or height of a building or facility....
-
4.2 Stretchers
As currently designed, oxygen cylinders are typically transported in a horizontal position below the patient bed surface, consuming critical vertical height....
