Kitchen worktops which can be adjusted in height using a crank handle are the budget solution for kitchens catering to both seated and standing users. These are most commonly used in...
Search Results "Fire-Building Surface"
Filters
Commonly Searched Documents
-
Pressalit Care Lift for Manually Height Adjustable Worktop
-
704.5 Fire-resistance rating
Exterior walls shall be fire-resistance rated in accordance with Tables 601 and 602....
-
5.4.6 Transfer Support Gripping Surface Cross Section and Clearances for M301, M302, and M305.2
sufficient to enable individuals with disabilities to firmly grasp the gripping surface and support themselves during transfers....
-
Alterations to Qualified Historic Facilities [§202.5]
Alterations to Qualified Historic Facilities [§202.5] The standards contain specific provisions for qualified historic facilities which are defined as buildings or facilities that...
-
PUBLIC BUILDING OR FACILITY
[DSA-AC] A building or facility or portion of a building or facility designed, constructed, or altered by, on behalf of, or for the use of a public entity subject to Chapter 1, Section 1.9.1.1...
-
M305.3.1.2 Diagnostic Equipment Containing a Wheelchair Space
On diagnostic equipment containing wheelchair spaces with one entry that also serves as the exit, the length of the gripping surface of horizontal standing supports shall be equal to or...
-
711.4.6 Floor fire doors
Floor fire doors used to protect openings in fire-resistance-rated floors shall be tested in the horizontal position in accordance with ASTM E 119, and shall achieve a fire-resistance rating...
-
PRIVATE BUILDING OR FACILITY
[DSA-AC] A place of public accommodation or a commercial building or facility subject to Chapter 1, Section 1.9.1.2. [2010 ADA Standards 106.5] Private Building or Facility....
-
Additions: ADA Standard Section 202.2
Section 202.2 covers the most current requirements for additions in existing building and facilities.
-
Businesses Inspected by a CASp - from DSA
Pursuant to Government Code Section 4459.7(a)(2)(B), the Division of the State Architect (DSA) publishes the following list of businesses inspected by a Certified Access Specialist...
-
M301.2.2, M302.2.2 Transfer Size
This transfer surface is located on the longitudinal (long) side of the stretcher—either right or left side Rationale: Based upon full committee discussion and harmonization with Exam...
-
Clear Width [1018.4]
of beach access routes must be a minimum of 60 inches to enable people using mobility devices to pass people traveling in the opposite direction without veering off the firm and stable surface...
-
Q12: Full-depth Pavement Patching
Q12: Is full-depth pavement patching considered maintenance? A12: The answer to this question depends on the scope and location of the pavement patch. If the pavement patch work...
-
T208 Passenger Access Routes
[See subsections ...]
-
Highest and Lowest Heights Obtained
Table 9 shows the 5th, 25th, 50th, 75th, and 95th percentiles for protocols A through C. These data represent the ability of the participants in the study to complete a transfer. The...
-
B2. Slope
B2. Is the vehicle space relatively level (2% maximum slope in all directions)? Yes _____ No _____
-
2.4 Slope
The running slope (grade) and cross slope of ORARs shall comply with section 2.4. Exception: Where an ORAR is permitted to be provided within a vehicular way, the...
-
11B-226.4 Baby changing tables
Baby changing tables shall comply with Sections 11B-309 and 11B-902. Baby changing tables when deployed shall not obstruct the required width of an accessible route except as allowed...
-
11B-226.4 Baby diaper changing station
Baby diaper changing stations shall comply with Sections 11B-309 and 11B-902. Baby diaper changing stations when deployed shall not obstruct the required width of an accessible route...
-
Height
The Access Board is considering whether 6 inches minimum and 19 inches maximum above the transfer surface would be an appropriate height for transfer supports on diagnostic equipment used...
-
101.4.7 Existing buildings
The provisions of the California Existing Building Code shall apply to matters governing the repair, alteration, change of occupancy, addition to and relocation of existing buildings....
-
AIAU ADA Tolerances and Acceptable Measurements Training Course 1.5 LUs
ADA Tolerances and Acceptable Measurements Learn how to analyze and apply ADA and other accessibility tolerance language where it is different from building code tolerance language...
