Mill finish aluminum Integral vapor barrier option available Key Specifications: Floor/Floor, Floor/Wall Conditions Movement: +/- 25% Joint width...
Search Results "Character Width (VMS)"
Filters
Commonly Searched Documents
-
Inpro Corporation JointMaster® 101 Series Floor Expansion Joint Covers
-
Inpro Corporation JointMaster® 103 Series-VCT Expansion Joint Systems
assembly Standard loading capabilities Aluminum mill finish Key Specifications Floor/Floor, Floor/Wall Conditions Movement: +/- 25% Joint width...
-
SafePath EZCurb™ Wheelchair Ramps - Vertical Barrier Removal
Standard widths are 60" wide and are available from 2" to 6" in height....
-
Hussey Seating Company Roll-A-Way Seating
Available in 2-chair (approx. 46”/1168 mm) or 3-chair (approx. 66”/1676mm) widths to accommodate one or two wheelchairs. Adjacent companion chairs can be permanently installed....
-
ETA Opinion: ADA Signage at Exit Doors
§703.2 Raised Characters. Raised characters shall comply with 703.2 and shall be duplicated in Braille complying with 703.3....
-
Midmark 630 HUMANFORM™ Procedures Table
Height: Minimum 18" (45.7 cm), Maximum 40" (101.6 cm) Seat Tilt Angle Range: 0 ̊ to 30 ̊ Back Support Angle Range: 0 ̊ to 80 ̊ Foot Support Angle Range:0 ̊ to 90 ̊ 28" Upholstery Width...
-
Healthcraft Invisia ADA Serenaseat™ Folding Shower Seat
The seating surface shall be 32"/81cm in width. Product back rest shall be removable. Product shall fold up against the wall with a profile of less than 3"/7.5cm....
-
1117B.5.7
2013 CBC 11B-703.4.1 are similar to 2010 ADAS 703.4.1, and are different from the earlier regulations, which prescribed the mounting height of the tactile signs, rather than the tactile characters...
-
Overview of Proposed Guidelines
including requirements for flangeway gaps; On-street parking that is marked or metered, and passenger loading zones; Pedestrian signs, including requirements for visible characters...
-
Detectable Warning Surfaces at Shared Use Path Intersections
The detectable warning surface would extend 2 feet minimum in the direction of pedestrian travel and the full width of the intersecting segments. We request comments on this issue....
-
Dune Crossings [1018.10]
When a dune crossing is part of a beach access route, the clear width of the beach access route may be reduced from a minimum of 60 inches to a minimum of 48 inches....
-
5.3.3.1 Transfer Sides Recommendation for Exam Chairs with Fixed Footrests
The Committee recommends exam chairs with a fixed footrest have a transfer surface minimum of a 17 inch depth and a 21 inch width located on both sides of the chair to allow for a left or...
-
Technical Requirements for Accessible Hiker/Pedestrian Trails
Section 7.4 of FSTAG explains the accessibility requirements for trails, including trail surfacing, clear tread width, grade and cross slope, resting intervals, passing spaces, tread obstacles...
-
1017.1 General
The technical requirements address the surface of the trails, passing spaces, and resting intervals (1017.2); the clear tread width of trails (1017.3); passing spaces (1017.4); tread obstacles...
-
2.3.4 Analysis of Door Use Difficulty
The mean, median and range of WhMD user age, occupied width, occupied length and maximum power grip were also reported as we thought that these variables might help explain the door use...
-
Comparison: 2010 and 1991 ADA Standards for Accessible Design - Scoping Requirements
., Door opening shall provide clear width of 32 inches minimum, Thresholds shall be ½ inch high maximum....
-
Comparison of Single-User Toilet Room Layouts: 1A, 1B, and 1C
The size of this space is determined by the minimum width required for the water closet and lavatory between the side walls, the minimum wheelchair turning space, and the space required...
-
Ramps
They must meet the ADA's requirements regarding slope, width, landings, handrails, and edge protection....
-
11B-404.2.10 Door and gate surfaces
Swinging door and gate surfaces within 10 inches (254 mm) of the finish floor or ground measured vertically shall have a smooth surface on the push side extending the full width of the door...
-
M302.2.4 Transfer Sides (Section-by-Section Analysis)
diagnostic equipment used by patients in the seated position required transfer surfaces to have the option to transfer from a mobility device onto one short side (depth) and one long side (width...
-
2. Shared Use Paths
rights-of-way guidelines, which address access to sidewalks, streets, and other pedestrian facilities, provide requirements for pedestrian access routes, including specifications for route width...
-
2. Shared Use Paths
rights-of-way guidelines, which address access to sidewalks, streets, and other pedestrian facilities, provide requirements for pedestrian access routes, including specifications for route width...
-
404.2.10 Door and Gate Surfaces
Swinging door and gate surfaces within 10 inches (255 mm) of the finish floor or ground measured vertically shall have a smooth surface on the push side extending the full width of the door...
-
Accessible Routes on the Playing Surface
The orientation of the length and the width have not been specified for added flexibility in design. Slopes on landings must be no more than 1:20 (5%)....
