(f) Private entities that are primarily engaged in the business of transporting people and whose operations affect commerce shall not discriminate against any individual on the basis of...
Search Results "Wheelchair Space (Transportation)"
Filters
Commonly Searched Documents
-
§ 37.5(f)
-
4.16.2 Clear Floor Space
Clear floor space for water closets not in stalls shall comply with Fig. 28. Clear floor space may be arranged to allow either a left-handed or right-handed approach....
-
11B-703.2.8 Line spacing
11B-703.2.8 Line spacing....
-
11B-206.4.5 Tenant spaces
[2010 ADAS] 206.4.5 Tenant Spaces. At least one accessible entrance to each tenancy in a facility shall comply with 404....
-
11B-206.4.5 Tenant spaces
[2010 ADAS] 206.4.5 Tenant Spaces. At least one accessible entrance to each tenancy in a facility shall comply with 404....
-
11B-206.4.5 Tenant spaces
[2010 ADA Standards] 206.4.5 Tenant Spaces. At least one accessible entrance to each tenancy in a facility shall comply with 404....
-
Section 37.37 Other Applications
Transportation service provided by public accommodations is viewed as being provided by private entities not primarily engaged in the business of transporting people....
-
11B-406.3.2 Turning space
A turning space 48 inches (1219 mm) minimum by 48 inches (1219 mm) minimum shall be provided at the bottom of the curb ramp....
-
11B-406.3.2 Turning space
A turning space 48 inches (1219 mm) minimum by 48 inches (1219 mm) minimum shall be provided at the bottom of the curb ramp....
-
11B-703.2.7 Character spacing
Character spacing shall be measured between the two closest points of adjacent raised characters within a message, excluding word spaces....
-
1133A.2 Clear floor space
Clear floor space at kitchens shall comply with the following:...
-
4. Obstructions
Transportation entities are not required to pick up passengers with disabilities at nondesignated locations....
-
11B-703.2.8 Line spacing
Spacing between the baselines of separate lines of raised characters within a message shall be 135 percent minimum and 170 percent maximum of the raised character height. [S.H. ...
-
703.5.9 Line Spacing
703.5.9 Line Spacing. Spacing between the baselines of separate lines of characters within a message shall be 135 percent minimum and 170 percent maximum of the character height....
-
Machinery Spaces (§203.5)
Machinery Spaces (§203.5) Spaces used only by service personnel for maintenance, repair, or occasional monitoring of equipment Examples: elevator pits/ penthouses, mechanical/...
-
11B-406.3.2 Turning space
A turning space 48 inches (1219 mm) minimum by 48 inches (1219 mm) minimum shall be provided at the bottom of the curb ramp....
-
TSA Cares: Special Procedures - Disabilities & Medical
Disabilities and Medical Conditions To ensure your security, all travelers are required to undergo screening at the checkpoint. You or your traveling companion may consult the TSA...
-
TSA Cares: Passenger Support
Screening Assistance TSA Cares is a helpline that provides travelers with disabilities, medical conditions and other special circumstances additional assistance during the...
-
11B-813.2.9 Overlap
Required clear floor spaces, clearance at fixtures, and turning space shall be permitted to overlap....
-
206.7 Platform Lifts, F206.7 Platform Lifts
The final rule does not permit the use of platform lifts at the primary entrance to an emergency transportable housing unit required to provide mobility features....
-
A4.6.3 Parking Spaces
However, this aisle does not permit lifts or ramps to be deployed and still leave room for a person using a wheelchair or other mobility aid to exit the lift platform or ramp....
-
603.2.3 Door Swing
Doors shall not swing into the clear floor space or clearance required for any fixture. Doors shall be permitted to swing into the required turning space. EXCEPTIONS: 1....
-
Section 36.302(f) Ticketing (Section-by-Section Analysis)
Section 36.302(f) Ticketing (Section-by-Section Analysis) The 1991 title III regulation did not contain specific regulatory language on ticketing. The ticketing policies and...
-
7. Amend 28 CFR part 35 by adding § 35.138 to read as follows:
7. Amend 28 CFR part 35 by adding § 35.138 to read as follows:
