Surfaces of transfer walls shall not be sharp and shall have rounded edges....
Search Results "Ground Surface"
-
11B-1009.4.4 Surface
-
11B-1009.5.5 Surface
The surface of the transfer system shall not be sharp and shall have rounded edges....
-
11B-1009.4.4 Surface
Surfaces of transfer walls shall not be sharp and shall have rounded edges....
-
11B-1009.5.5 Surface
The surface of the transfer system shall not be sharp and shall have rounded edges....
-
11.2 Q. Under the individual building test, at what point of the planned entrance is the measurement taken?
A. On a horizontal plane, the center of each individual doorway should be the point of measurement when measuring to an arrival point, whether the doorway is an entrance door to the...
-
5.4.5.1 Transfer and Positioning Support Position for Imaging Equipment
The transfer or positioning support should be oriented horizontally on imaging equipment with transfer surfaces....
-
Landscape Forms Inc. Presidio Trash Receptacle
Constructed of 5/8in. solid metal rod welded to 1-1/4in. steel frame Hinged door allows easy access for emptying; opens with toe clip mechanism, latches when closed Freestanding/surface...
-
11B-407.4.10.2 Surfaces
Support rails shall be smooth and any surface adjacent to them shall be free of sharp or abrasive elements....
-
11B-407.4.10.2 Surfaces
Support rails shall be smooth and any surface adjacent to them shall be free of sharp or abrasive elements....
-
Landscape Forms Inc. Parc Vue Trash Receptacle
Lid attaches to basket with cable Base has center hole for optional surface mounting All metal is finished with Landscape Forms’ proprietary Pangard II® polyester powdercoat, a hard...
-
Figure 505.7.2 Handrail Non-Circular Cross Section – Drawing from the U.S. Access Board
-
Amusement Rides
Word Fillable Form (0.8MB) Word Non-Fillable Form (0.7MB) PDF Non-Fillable Form (0.5MB)
-
M301.2.3 Size
The size of the transfer surface shall comply with M301.2.3.1 or M301.2.3.2. The size of transfer surfaces shall be measured from center points of their opposing sides....
-
M303.3.3.2 Cross Slope
The cross slope of ramp runs shall not be steeper than 1:48.
-
4.7.9.1 General
Where utility sinks are provided in a recreation facility that also contains a cook top or conventional range, at least 5 percent, but not less than one in each accessible space,...
-
1991 / 1994 ADA Standards - Plan Review Tool - Slopes
1991 / 1994 ADA Standards - Plan Review Tool - Slopes Click here to view/download the pdf "1991 / 1994 ADA Standards - Plan Review Tool - Slopes" (354 KB) * * * * * * *
-
M303.3.3.2 Cross Slope
The cross slope of ramp runs shall not be steeper than 1:48.
-
Non-Circular Cross Section and Clearance (§505.5, §505.7)
Non-Circular Cross Section and Clearance (§505.5, §505.7)
-
M301.3.1 Transfer Supports
A.1) A transfer support will extend horizontally along the side of the patient scanning/imaging table at least the minimum width of the transfer surface, but in all cases a 28 inches minimum...
-
1(2)(a)(i) Individual building test
To determine site impracticality, the slope would be measured at ground level from the point of the planned entrance on a straight line to (i) each vehicular or pedestrian arrival point...
-
1011.1 General
All outdoor constructed features are required to comply with the provisions for clear ground space (1011.2) and operable parts (1011.3)....
-
Adjustable Height Range Considered
to make up the difference between the two surfaces, in one direction or the other....
-
Pilot Rock CN-R/R Round Receptacle Perforated Steel
The cross braces have holes for surface mounting options. (Anchor bolts not included). All welded construction - no assembly required....
-
Landscape Forms Inc. Chase Park Trash Receptacle
style Logo band may be specified for side- or top-opening styles (not available for waste/recycle signage) Keyed lock may be specified for all styles May be left freestanding or surface...
