All hinges to be with adjustable spring tension with nonremovable pins as listed in hardware groupings and shall be provided with the width that will clear trim to allow for maximum degree...
Search Results "Clear Tread Width"
Commonly Searched Documents
- TownSteel THSP179 Standard Duty Spring Hinge
-
Accessibility - Flatness and Lippage
Project specifications should make clear which trade is responsible for the required alterations if the subfloor is found not to be in compliance with the flatness requirements....
-
1017.9 Protruding Objects
However, entities should maintain the vertical clearance along the trail tread, resting intervals, and passing spaces free from tree branches for 80 inches high minimum above the ground....
-
Required Compliance [§210]
The Standards do not apply to stairways that are not part of a required means of egress nor to alternating tread devices and “ship’s ladders.”...
-
Showers
Several commenters requested that the final Guidelines provide dimensions on the appropriate width and height of showers and shower doors....
-
In-swinging Bathroom Doors
Once a minimum door width is provided, a tenant who finds a bathroom not readily usable can have the door rehung as an outswinging door....
-
11B-502.6.3 Location
Signs shall be permanently posted either immediately adjacent to the parking space or within the projected parking space width at the head end of the parking space....
- Lutron Sivoia QED Kirbé Vertical Motorized Drapery System
- LaCantina Multi-slide Contemporary Clad Sliding Door System
-
Step 2: Identify the Presence of Limiting Factors
Is the trail tread width 12 inches (227 millimeters) or less for a distance of at least 20 feet (6 meters)?...
- Stanley SB600 Bifolding Door
-
References
The exception permits slopes not steeper than 1:48. 305.2 (Clear Floor or Ground Space) Floor or Ground Surfaces....
-
1003.2.12.2 Opening limitations
Exception: The triangular opening formed by the riser, tread and bottom rail at the open side of a stairway shall be of a maximum size such that a sphere of 6 inches (152mm) in diameter...
-
802.1.5 Overlap
The term "circulation paths" used in 802.1.5 means aisle width required by applicable building or life safety codes for the specific assembly occupancy....
- Lift-U® Fold-Out Rising Floor Ramp
-
11B-802.1.5 Overlap
The term "circulation paths" used in 802.1.5 means aisle width required by applicable building or life safety codes for the specific assembly occupancy....
-
802.1.5 Overlap
The term "circulation paths" used in 802.1.5 means aisle width required by applicable building or life safety codes for the specific assembly occupancy....
-
802.1.5 Overlap
The term "circulation paths" used in Section 802.1.5 means aisle width required by applicable building or life safety codes for the specific assembly occupancy....
-
11B-802.1.5 Overlap
The term "circulation paths" used in 802.1.5 means aisle width required by applicable building or life safety codes for the specific assembly occupancy....
-
11B-802.1.5 Overlap
The term "circulation paths" used in Section 11B-802.1.5 means aisle width required by applicable building or life safety codes for the specific assembly occupancy....
-
Guidelines for Requirement 3
(2) For doors within individual dwelling units, the Department has retained, in the final Guidelines, the design specification that a door with a clear opening of at least 32 inches...
-
Elevated Dune Crossings
The clear width of elevated dune crossings may be narrower than the rest of the beach access route, but must be at least 48 inches (1,220 millimeters)....
-
1016.1 General
The technical requirements address the surface of outdoor recreation access routes, passing spaces, and resting intervals (1016.2); the clear width of outdoor recreation access routes (1016.3...
-
Stairs, short-term list
Well, the tread and monitor Identification and identification of the stairs. Response by [Participant]: But then again, stair safety would be legitimate for all of these....