Patient support surfaces can be adjusted to heights outside the specified dimensions when not needed for patient transfer such as when performing diagnostic procedures....
Search Results "Patient Room"
Commonly Searched Documents
-
Transfer Surface Height (M301.2.1 and M302.2.1)
-
11B-224.2.1 Fifty or less guest room facilities
Facilities that are subject to the same permit application on a common site that each have fifty or fewer guest rooms may be combined for the purposes of determining the required number...
- Midmark 630 HUMANFORM™ Procedures Table
-
M101.2 Application
is designed to support: • Equipment used by patients in a supine, prone, or side-lying position (see M301); • Equipment used by patients in a seated position (see M302); • Equipment...
- Guldmann GH3 Twin Lifting Module
-
11B-803.5 Coat hooks and shelves
Coat hooks provided within the room shall be located within one of the reach ranges specified in Section 11B-308....
-
Coat Hooks and Shelves: ADA Standard Section 222.2
Section 222.2 covers scoping requirements in the current ADA Standards for coat hooks and shelves in dressing, fitting, and locker rooms.
-
Transfer Surface Size: Equipment Used by Patients in a Seated Position (M302.2.2)
Seats on diagnostic equipment used by patients in a seated position typically provide back and arm support for patient comfort and stability....
-
6.1(1)
(1) Hospitals - general purpose hospitals, psychiatric facilities, detoxification facilities -- At least 10 percent of patient bedrooms and toilets, and all public use and common use areas...
-
11B-222.2 Coat hooks and shelves
Where coat hooks or shelves are provided in dressing, fitting or locker rooms without individual compartments, at least one of each type shall comply with Section 11B-803.5....
-
11B-224.2.2 More than fifty guest room facilities
Facilities with more than fifty guest rooms shall be treated separately for the purposes of determining the required number of accessible rooms and type of accessible bathing facility....
-
Lift Compatibility (M301.4 and M302.4)
M301.4 and M302.4 would require diagnostic equipment used by patients in a supine, prone, or sidelying position, and diagnostic equipment used by patients in a seated position to be usable...
-
Folding Seats on Equipment Used by Patients Seated in a Wheelchair (M302.4 Exception)
M302.4 includes an exception for diagnostic equipment that is designed for use by patients seated in a wheelchair and provides a folding seat....
-
Saunas and Steam Rooms: ADA Standard Section 612
Section 612 covers the current ADA Standards for saunas and steam rooms.
-
Toilet and Bathing Rooms: ADA Standard Section 603
Section 603 covers the current ADA Standards for toilet and bathing rooms.
- Midmark 623 Barrier-Free® Power Examination Table
-
Location and Size
Each side rail can be removed to permit patients to transfer onto and off of the table, and to permit health care personnel to perform diagnostic procedures....
-
D. M304 Diagnostic Equipment Used by Patients in a Standing Position
M304 provides the technical requirements for diagnostic equipment used by patients in a standing position....
- Brewer Assist Power Procedure Table
- Integralift Fixed Ceiling Lift Short Instructional Video
-
Coat Hooks and Shelves: ADA Standard Section 803.5
Coat hooks provided within the room shall be located within one of the reach ranges specified in 308....
-
M302.4 Lift Compatibility (Section-by-Section Analysis)
The MDE NPRM proposed to require that diagnostic equipment used by patients in the seated position be usable with a patient lift and comply with either the proposed clearance in base (proposed...
-
Toilet Rooms and Bathing Rooms: ADA Standard Section 216.8
Section 216.8 covers scoping requirements in the current ADA Standards for signs at toilet rooms and bathing rooms.
-
5.7.1 Lift Compatibility Clearance in Base for Equipment Used by Patient in Supine, Prone, or Side-Lying Position
5.7.1 Lift Compatibility Clearance in Base for Equipment Used by Patient in Supine, Prone, or Side-Lying Position....