Car control buttons with floor designations shall comply with Section 11B-407.4.6.2. Exception: Reserved. [2010 ADA Standards] EXCEPTION: In existing elevators, buttons shall...
Search Results "Area Raised for Security"
Filters
Commonly Searched Documents
-
11B-407.4.6.2 Buttons
-
EMPLOYEE WORK AREA
Corridors, toilet rooms, kitchenettes and break rooms are not employee work areas....
-
Employee Work Area
Corridors, toilet rooms, kitchenettes and break rooms are not employee work areas....
-
11B-407.4.7.2 Keypads
The number five key shall have a single raised dot. The dot shall be 0.118 inch (3 mm) to 0.120 inch (3.05 mm) base diameter and in other aspects comply with Table 11B-703.3.1....
-
The Accessibility Resource Center
This guide is produced by the Social Security Administration - Accessibility Resource Center (ARC)....
-
Inventory Control Devices
Inventory Control Devices It is important that inventory control or security devices not obstruct required maneuvering clearances at doors....
-
Raised Crossings
Raised crossings, where provided, eliminate the need for curb ramps while serving to reduce traffic speeds....
-
11B-206.2.17 Play areas
Play areas shall provide accessible routes in accordance with Section 11B-206.2.17....
-
Social Security Disability Benefits Guide
Social Security disability benefits can provide for your family when an injury, illness, or disability prevents you from working and earning an income....
-
703.2.5 Character Height
EXCEPTION: Where separate raised and visual characters with the same information are provided, raised character height shall be permitted to be ½ inch (13 mm) minimum. ...
-
703.2.5 Character Height
[ECTCR UFAS 4.30.4] EXCEPTION: Where separate raised and visual characters with the same information are provided, raised character height shall be permitted to be ½ inch (13 mm) minimum...
-
11B-703.2.5 Character height
Exception: Reserved [2010 ADAS] EXCEPTION: Where separate raised and visual characters with the same information are provided, raised character height shall be permitted to be ½ inch...
-
§ 38.159(d)(6) Stowage
When not being used for securement, or when the securement area can be used by standees, the securement system shall not interfere with passenger movement, shall not present any hazardous...
-
Don-Jo Mfg., Inc. Door Flip Guards 1603
Number 1603 Ansi L33042 Shelf pack 10 Finishes 605, 606, 613, 625,...
-
TownSteel TDG129 Door Guard
TDG129 Door Guard is made from zinc alloy. It is provided with projected lock ball and flip guard swing bar not allowing forced entry when...
-
Don-Jo Mfg., Inc. Door Flip Guards 1604
Number 1604 Ansi L13042 Shelf pack 10 Finishes 605, 606, 613, 625,...
-
1009.3.3 Area of Refuge
Stairways shall either incorporate an area of refuge within an enlarged floor-level landing or shall be accessed from an area of refuge complying with Section 1009.6....
-
Yale YSSL10 Auxiliary Latch
Offering ADA compliance and UL/cUL fire rating for up to 3 hours, the YSSL10 auxiliary latch is perfect for securing your auxiliary doors, such as dutch doors, communicating doors, or shallow...
-
Buttons: ADA Standard Section 407.4.6.2
Section 407.4.6.2 covers the current ADA Standards for the elevator car control buttons.
-
703.2.5 Character Height
EXCEPTION: Where separate raised and visual characters with the same information are provided, raised character height shall be permitted to be 1/2 inch (13 mm) minimum....
-
203.14 Raised Diving Boards and Diving Platforms
203.14 Raised Diving Boards and Diving Platforms. Raised diving boards and diving platforms shall not be required to comply with these requirements or to be on an accessible route....
-
11B-703.2.5 Character height
[2010 ADA Standards] EXCEPTION: Where separate raised and visual characters with the same information are provided, raised character height shall be permitted to be ½ inch (13 mm)...
-
11B-703.2.5 Character height
Exception: Reserved [2010 ADAS] EXCEPTION: Where separate raised and visual characters with the same information are provided, raised character height shall be permitted to be ½ inch...
-
703.2.4 Character Proportions
Characters shall be selected from fonts where the width of the uppercase letter “O” is 55 percent minimum and 110 percent maximum of the height of the uppercase letter “I”.
