The slopes of beach access routes shall comply with 1018.7.
Search Results "Hybrid Surface System"
-
1018.7 Slopes
-
1014.2.1.2 Floor Height
The camp shelter floor at the entrance shall be 19 inches (485 mm) high maximum measured from the clear ground space.
-
1.2.5 Ramps
1.2.5 Ramps. When overall running slope and cross slope for accessible ramps are measured according to Sections 1.1.11 a recommended tolerance for these slopes is +0.5%. In the...
- Fire Safety and Disabilities Guide
-
I. Slip Resistant Surface—Aisles, Steps, Floor Areas Where People Walk, Floor Areas in Securement Locations, Lift Platforms, Ramps
to keep a shoe heel or crutch tip from slipping on a walking surface under conditions likely to be found on the surface....
-
5.3.3 Transfer Sides Recommendations for M302
transfer onto the short side and the long side of the surface....
-
M304.2.2 Standing Supports (Section-by-Section Analysis)
The MDE NPRM proposed requiring standing supports on each side of the standing surface of diagnostic equipment used by patients in the standing position, and compliance with the technical...
- GE Artistry™ Series 30" Free-Standing Electric Range ABS45DFWS
- Varidesk LLC. Pro Desk 60™ Height-Adjustable Standing Desk
- ROXIMITY's Model O iBeacon
- Allen Tel ADA Outdoor Phone with Amplified Receiver and No Dial - No Housing
- inLOOP Personal Loop 400
- Allen Tel ADA Outdoor Disability Speakerphone Single Number Dial
- Allen Tel Emergency Phone Automatic Ring Down - No Dial
- Allen Tel Emergency Phone Automatic Ring Down Circuit - Single Number Dial
- Allen Tel ADA Outdoor Phone with Amplified Receiver and No Dial
- Signaids Floor Numbering and Stair Shaft Designation-Style 2
- Signaids Floor Numbering and Stair Shaft Designation-Style 1
- Allen Tel ADA Outdoor No Dial Phone with Speakerphone
- ROXIMITY's Model X iBeacon
-
1016.8.3 Slope
Where the surface is other than asphalt, concrete, or boards, slopes not steeper than 1:20 are permitted when necessary for drainage....
-
M302.2.4 Transfer Sides
Options to transfer from a mobility device shall be provided on two adjoining sides of transfer surfaces. ...
-
Section 4.26.2
• Section 4.26.2 of the 1991 Standards requires handrail gripping surfaces to have a diameter of 1 ¼ inches to 1 ½ inches, or to provide an equivalent gripping surface....
-
1016.8.3 Slope
EXCEPTION: Where the surface is other than concrete, asphalt, or boards, slopes not steeper than 1:20 shall be permitted when necessary for drainage....