Height: Minimum 18" (45.7 cm), Maximum 40" (101.6 cm) Seat Tilt Angle Range: 0 ̊ to 30 ̊ Back Support Angle Range: 0 ̊ to 80 ̊ Foot Support Angle Range:0 ̊ to 90 ̊ 28" Upholstery Width...
Search Results "Compartment Width"
Commonly Searched Documents
- Midmark 630 HUMANFORM™ Procedures Table
-
Table of Contents
505 Handrails CHAPTER 6: PLUMBING ELEMENTS AND FACILITIES 601 General 602 Drinking Fountains 603 Toilet and Bathing Rooms 604 Water Closets and Toilet Compartments...
-
Detectable Warning Surfaces at Shared Use Path Intersections
The detectable warning surface would extend 2 feet minimum in the direction of pedestrian travel and the full width of the intersecting segments. We request comments on this issue....
-
Dune Crossings [1018.10]
When a dune crossing is part of a beach access route, the clear width of the beach access route may be reduced from a minimum of 60 inches to a minimum of 48 inches....
-
5.3.3.1 Transfer Sides Recommendation for Exam Chairs with Fixed Footrests
The Committee recommends exam chairs with a fixed footrest have a transfer surface minimum of a 17 inch depth and a 21 inch width located on both sides of the chair to allow for a left or...
-
Technical Requirements for Accessible Hiker/Pedestrian Trails
Section 7.4 of FSTAG explains the accessibility requirements for trails, including trail surfacing, clear tread width, grade and cross slope, resting intervals, passing spaces, tread obstacles...
-
1017.1 General
The technical requirements address the surface of the trails, passing spaces, and resting intervals (1017.2); the clear tread width of trails (1017.3); passing spaces (1017.4); tread obstacles...
-
2.3.4 Analysis of Door Use Difficulty
The mean, median and range of WhMD user age, occupied width, occupied length and maximum power grip were also reported as we thought that these variables might help explain the door use...
-
Comparison: 2010 and 1991 ADA Standards for Accessible Design - Scoping Requirements
., Door opening shall provide clear width of 32 inches minimum, Thresholds shall be ½ inch high maximum....
- Tork Foam Soap Dispenser – with Intuition® Sensor, Stainless Steel
- Sloan HYB-7000 Urinal
- Sloan HYB-1000 Urinal
- Sloan HYB-4000 Urinal
- Automatic Curtain Ltd CL-820 Single Track Systems
- Automatic Curtain Ltd. CL-820 Dual Track Systems
- Spectrum Aquatics Summit 500BP Therapy Pool Lift (Battery Powered)
- Tork Image Design™ Matic® Hand Towel Roll Dispenser with Intuition® Sensor, Recessed
-
Fur out the wall
side wall or partition, except that the water closet shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum from the side wall or partition in the ambulatory accessible toilet compartment...
- Panda S.85 All Aluminum Slim Profile Lift and Slide System
-
1115B.4.1, Item 1
Exception: The centerline of accessible water closets located in ambulatory accessible compartments shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum from the side wall...
-
5.4.4 Transfer Support Distance from Transfer Surface Recommendations for M301 and M302
that is opposite the transfer side (see M301.2.3 and M302.2.3) similar to the provisions in the 2004 ADA and ABA Accessibility Guidelines for grab bars provided at bathtubs and shower compartments...
-
Program Accessibility
Structural changes may include combining two toilet compartments to create an accessible toilet compartment, lowering a section of a service counter, installing a ramp at a building entrance...
-
Ramps
They must meet the ADA's requirements regarding slope, width, landings, handrails, and edge protection....
-
11B-404.2.10 Door and gate surfaces
Swinging door and gate surfaces within 10 inches (254 mm) of the finish floor or ground measured vertically shall have a smooth surface on the push side extending the full width of the door...