Turning space complying with 304 shall be provided within the cell....
Search Results "Water Closet Clear Floor Space"
-
807.2.1 Turning Space
-
11B-604.8.1.4 Toe clearance
Compartments for children’s use shall provide a toe clearance of 12 inches (305 mm) minimum above the finish floor....
-
11B-604.8.1.4 Toe clearance
Compartments for children’s use shall provide a toe clearance of 12 inches (305 mm) minimum above the finish floor....
-
808.2 Turning Space
Where provided, areas that are raised or depressed and accessed by ramps or platform lifts with entry ramps shall provide unobstructed turning space complying with 304....
-
808.2 Turning Space
Where provided, areas that are raised or depressed and accessed by ramps or platform lifts with entry ramps shall provide unobstructed turning space complying with 304....
-
Mansfield Toilet ADA Commercial Package CP-1313
Bowl Specifically designed for commercial and industrial applications Elongated SmartHeight (16-1/2" high bowl), floor mount, rear outlet ADA Compliant High performance, high...
-
Toilet and Bathing Facilities: ADA Standard Section 807.2.4
Where provided, no fewer than one water closet, one lavatory, and one bathtub or shower shall comply with the applicable requirements of 603 through 610....
-
208 Parking Spaces
Section 208 specifies the minimum number of parking spaces required to be accessible....
-
11B-208.2.3.2 Additional parking spaces for residents
Where the total number of parking spaces provided for each residential dwelling unit exceeds one parking space per residential dwelling unit, 2 percent, but no fewer than one space, of all...
-
11B-604.1 General
Water closets and toilet compartments shall comply with Sections 11B-604.2 through 11B-604.8....
-
Flush Controls
The original ADAAG specified that the controls be located on the wide side of the water closet....
-
1016.8.4 Turning Space
Where resting intervals are provided adjacent to an outdoor recreation access route, a turning space complying with 304.3.2 shall be provided. ...
-
11B-703.2.7 Character spacing
Character spacing shall be measured between the two closest points of adjacent raised characters within a message, excluding word spaces....
-
11B-805.4.3 Turning space
Turning space complying with Section 11B-304 shall be provided within the room....
-
1011.2.4 Openings
This section requires openings in the clear ground space such as drainage grates to not allow passage of a sphere more than 1/2 inch in diameter....
-
11B-304.3.1 Circular space
The turning space shall be a space of 60 inches (1524 mm) diameter minimum. The space shall be permitted to include knee and toe clearance complying with Section 11B-306....
-
11B-604.1 General
Water closets and toilet compartments shall comply with Sections 11B-604.2 through 11B-604.8....
-
11B-703.4.2 Location
Signs containing tactile characters shall be located so that a clear floor space of 18 inches (457 mm) minimum by 18 inches (457 mm) minimum, centered on the tactile characters, is provided...
-
206.4.5 Tenant Spaces
206.4.5 Tenant Spaces. At least one accessible entrance to each tenancy in a facility shall comply with 404....
-
802.3.1 Alignment
In row seating, companion seats shall be located to provide shoulder alignment with adjacent wheelchair spaces....
-
1115B.4.1, Item 1
When 2013 CBC was drafted, the location of accessible water closets was more narrowly restricted, but for water closets permitted and/or installed between August 1, 2012 and January 1, 2014...
-
711.4.6 Floor fire doors
Floor fire doors used to protect openings in fire-resistance-rated floors shall be tested in the horizontal position in accordance with ASTM E 119, and shall achieve a fire-resistance rating...
-
805.2 Turning Space
Turning space complying with 304 shall be provided within the room....