408.4.2 Floor Surfaces. Floor surfaces in elevator cars shall comply with 302 and 303....
Search Results "Water Closet Clear Floor Space"
-
408.4.2 Floor Surfaces
-
11B-703.2.8 Line spacing
Spacing between the baselines of separate lines of raised characters within a message shall be 135 percent minimum and 170 percent maximum of the raised character height....
-
11B-703.2.8 Line spacing
Spacing between the baselines of separate lines of raised characters within a message shall be 135 percent minimum and 170 percent maximum of the raised character height....
-
4.3.5.2 180-degree turn
The 1525 mm (60 in.) turning space would be used instead....
-
11B-808.2 Turning space
Where provided, areas that are raised or depressed and accessed by ramps or platform lifts with entry ramps shall provide unobstructed turning space complying with Section 11B-304....
-
11B-808.2 Turning space
Where provided, areas that are raised or depressed and accessed by ramps or platform lifts with entry ramps shall provide unobstructed turning space complying with Section 11B-304....
-
Just Manufacturing Classroom Concealed Ledgemount Teardrop Handles Restricted Swing Faucet
Equipped with water saving aerator. Conforms to ANSI standard 112.18.1 Certified to NSF/ANSI 61 2.2 GPM flow restricting aerator....
-
Inpro Corporation JointMaster® 806 Series Floor Expansion Joint Covers
counter-sunk holes for easy installation Applicable for existing conditions, additions and new construction Anti-slip surface serrations Key Specifications Floor...
-
FUNCTIONAL SPACES
The rooms and spaces in a building or facility that house the major activities for which the building or facility is intended....
-
ACCESSIBLE SPACE
[DSA-AC & HCD 1-AC] A space that complies with the accessibility provisions of this code....
-
ACCESSIBLE SPACE
[DSA-AC & HCD 1-AC] A space that complies with the accessibility provisions of this code....
-
Technical Memorandum TM 2013-23 Storage (Not in Kitchens or Kitchenettes)
Effective Date: October 3, 2013 2012 TAS Reference: 225.2 TAS 225.2 requires at least one of each type of storage to comply with TAS 811 when storage is provided in all accessible spaces...
-
R304.2.1 Turning Space
R304.2.1 Turning Space....
-
R304.3.1 Turning Space
R304.3.1 Turning Space....
-
11B-604.8.1.1.3 Maneuvering space with end-opening door
In a wheelchair accessible compartment with a door located in the front wall or partition (facing the water closet), either in-swinging or out-swinging, a minimum 60 inches (1524 mm) wide...
-
11B-221.2 Wheelchair spaces
Wheelchair spaces complying with Section 11B-221.2 shall be provided in assembly areas with fixed seating....
-
11B-221.2 Wheelchair spaces
Wheelchair spaces complying with Section 11B-221.2 shall be provided in assembly areas with fixed seating....
-
T502.3.1 Clear Width
Doorways shall provide a clear opening of 32 inches (810 mm) minimum....
-
Line Spacing: ADA Standard Section 703.5.9
Spacing between the baselines of separate lines of characters within a message shall be 135 percent minimum and 170 percent maximum of the character height....
-
Bobrick Two-Wall Toilet Compartment Grab Bar B-5897
42" W x 54" D (107 x 137cm), 1-1/4" (32mm) dia. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1/8" (3mm) thick, type 304...
-
Bobrick Two-Wall Toilet Compartment Grab Bar Peened B-6897.99
42" W x 54" D (107 x 137cm), 1-1/2" (38mm) dia., peened finish. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1/8" (3mm)...
-
Bobrick Two-Wall Toilet Compartment Grab Bar Peened B-5897.99
42" W x 54" D (107 x 137cm), 1-1/4" (32mm) dia., peened finish. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1/8" (3mm)...
-
Bobrick Two-Wall Toilet Compartment Grab Bar B-6897
42" W x 54" D (107 x 137cm), 1-1/2" (38mm) dia. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1/8" (3mm) thick, type 304...
