Where shooting facilities with firing positions are designed and constructed at a site, at least 5 percent, but no fewer than one, of each type of firing position shall comply with Section...
Search Results "Pre-Construction Meeting"
-
11B-243.1 General
-
Sec. 469.102(a)
(a) The architect, interior designer, landscape architect, or engineer who has overall responsibility for the design of a constructed or reconstructed building or facility shall submit the...
-
709.3 Fire-resistance rating
Exception: Smoke barriers constructed of minimum 0.10-inch thick (2.5 mm) steel in Group I-3 buildings....
-
§ 35.151(i)(1)
(1) Newly constructed or altered streets, roads, and highways must contain curb ramps at any intersection having curbs or other barriers to entry from a street level pedestrian walkway....
-
1133A.4.1, Item 3
The sides of adjacent cabinets and the back wall, which may become exposed to moisture or food handling when a countertop is lowered, shall be constructed of durable, nonabsorbent materials...
-
6.1(3)
(3) Long term care facilities, nursing homes -- At least 50 percent of patient bedrooms and toilets, and all public use and common use areas are required to be designed and constructed to...
-
11B-243.1 General
Where shooting facilities with firing positions are designed and constructed at a site, at least 5 percent, but no fewer than one, of each type of firing position shall comply with Section...
-
1133A.4.1, Item 3
The sides of adjacent cabinets and the back wall, which may become exposed to moisture or food handling when a countertop is lowered, shall be constructed of durable, nonabsorbent materials...
-
§ 35.151(j)(1)
(1) Residential dwelling units designed and constructed or altered by public entities that will be offered for sale to individuals shall comply with the requirements for residential facilities...
-
11B-243.1 General
Where shooting facilities with firing positions are designed and constructed at a site, at least 5 percent, but no fewer than one, of each type of firing position shall comply with Section...
-
243.1 General
Where shooting facilities with firing positions are designed and constructed at a site, at least 5 percent, but no fewer than one, of each type of firing position shall comply with 1010....
- Sloan Optima® Sensor-Activated Soap Dispenser ESD-200, 250
- Grohe Euroeco Cosmopolitan E 1/2" Infra-red Electronic Bath Faucet
-
Re: Stair widths
I don't think this is a contradiction, just a higher standard for stairs which need to meet requirements for stairs which are considered part of the accessible means of egress. ...
- National Consortium on Deaf-Blindness
-
11B-202.3 Alterations
[ADA Title II] §35.151(b) New Construction and Alterations; Alterations....
-
11B-406.5.6 Grade breaks
Surface slopes that meet at grade breaks shall be flush....
-
§382.55(b)
for passengers with disabilities that go beyond those mandated by TSA (or, at a foreign airport, beyond the law of the country in which the airport is located), you must ensure that they meet...
-
§382.27(g)
(g) If a passenger does not meet advance notice or check-in requirements you establish consistent with this section, you must still provide the service or accommodation if you can do so...
-
K. Dauphin Street Accessible Entrance and Passenger Loading Zone
Dauphin Street Accessible Entrance and Passenger Loading Zone (1) Defendants will reconstruct the driveway, sidewalks, and entrance ramp of the Dauphin Street Entrance to the Tower to meet...
-
3.4 General Terminology
Meet one or more specifications of these guidelines. if, if ... then. Denotes a specification that applies only when the conditions described are present. may....
-
11B-406.5.6 Grade breaks
Surface slopes that meet at grade breaks shall be flush....
-
11B-406.5.6 Grade breaks
Surface slopes that meet at grade breaks shall be flush....
-
Sec. 469.003(a)(1)
(1) a building or facility used by the public that is constructed, renovated, or modified, in whole or in part, on or after January 1, 1970, using funds from the state or a county, municipality...