Where separate grab bars are required on adjacent walls at a common mounting height, an L-shaped or U-shaped grab bar meeting the dimensional requirements of Section 11B-607.4.1 or 11B-607.4.2...
Search Results "Riser Height"
-
11B-607.4 Grab bars
-
226.1 General
Consider work surfaces that are flexible and permit installation at variable heights and clearances....
-
604.5 Grab Bars
must be sufficient to permit the installation of rear and side wall grab bars that fully meet all accessibility requirements including, but not limited to, required length, installation height...
- SciFit Inclusive Fitness PRO1 - Upper Body Machine
- Cybex Total Access Cable Column Exercise Machine
- GameTime Thread the Needle Playground Equipment
- Whitehall Mfg. WH2142T2 Ligature Resistant Toilet Top Supply On-Floor Wall Waste
- Inclusion Solutions Poll Star Voting Booth
-
11B-502.3.3 Marking
The words "NO PARKING" shall be painted on the surface within each access aisle in white letters a minimum of 12 inches (305 mm) in height and located to be visible from the adjacent vehicular...
-
11B-502.3.3 Marking
The words "NO PARKING" shall be painted on the surface within each access aisle in white letters a minimum of 12 inches (305 mm) in height and located to be visible from the adjacent vehicular...
- TotTurf® Synthetic Grass: Play Spaces
-
Radiologic Equipment
Set stretcher height to be level with table surface for lateral transfer. 2. Adequate floor space to maneuver and position stretcher. 3....
-
Two-Way Communication
Section 407.4.9 provides criteria for emergency two-way communication systems in elevator cars which address the height of operable parts and identification by tactile characters....
-
404.2.10 Door and Gate Surfaces
stiles and having a bottom rail or shoe with the top leading edge tapered at 60 degrees minimum from the horizontal shall not be required to meet the 10 inch (255 mm) bottom smooth surface height...
-
Requirement 5. Light switches, electrical outlets, thermostats and other environmental controls in accessible locations.
If the reach is over an obstruction (for example, an overhanging shelf) between 20 and 25 inches in depth, the maximum height is reduced to 44 inches for forward approach; or 46 inches for...
-
11B-405.5 Clear width
Handrails may project into the required clear width of the ramp at each side 3½ inches (89 mm) maximum at the handrail height. 3. ...
-
Emergency Communications [4.10.14]
., complies with specifications for character proportion [4.30.2] and height [4.30.3] and contrast [4.30.5])....
-
Sight Lines
Some conventions, such as the average eye level height of a seated adult is within the accepted range for people seated in wheelchairs....
-
3.3.8 Knee Clearance Depth, minimum
The U.S. standard on knee clearance depth accommodated just over 50% of our overall sample, and was well below the 80th percentile values of maximum knee height for manual wheelchair users...
-
Examples of meeting your “access to goods and services” obligation when physical barrier removal is not readily achievable
In a different restaurant, it is not readily achievable to make counters accessible by lowering heights or providing an accessible counter or bar area....
-
II-2.1000 General
Likewise, being only five feet in height may prove to be an insurmountable barrier to an individual whose ambition is to play professional basketball....
-
404.2.10 Door and Gate Surfaces
stiles and having a bottom rail or shoe with the top leading edge tapered at 60 degrees minimum from the horizontal shall not be required to meet the 10 inch (255 mm) bottom smooth surface height...
-
Section 35.151(g)(4)
For stadium-style movie theaters, in Sec. 35.151(g)(4) of the NPRM the Department proposed requiring placement of wheelchair seating spaces and companion seats on a riser or cross-aisle...
-
Section 36.406(f)(4)
For stadium-style movie theaters, in Sec. 36.406(f)(4) of the NPRM the Department proposed requiring placement of wheelchair seating spaces and companion seats on a riser or cross-aisle...