reduce the number of required elements below the requirements of the 1991 Standards....
Search Results "Industry Standard"
-
Section 36.211 Maintenance of Accessible Features (Section-by-Section Analysis)
-
Section 35.133 Maintenance of accessible features. (Section-by-Section Analysis)
reduce the number of required elements below the requirements of the 1991 Standards....
-
BHMA
for Power Assist and Low Energy Power Operated Doors 1010.1.4.2, 11B-404.2.9, 11B-404.3, 11B-408.3.2.1, 11B-409.3.1 [2010 ADA Standards] 105.2.1 ANSI/BHMA....
-
Mannington Mills Outlook Collection Commercial Carpet
Performance that lives up to Mannington's standards. Design that lives up to yours....
-
Symmetry Limited Use/Limited Application (LU/LA) Elevator
Standard Features Automatic Self-leveling 1:2 cable hydraulic drive system Smooth start and stop 2 stop operation which can be increased up to 6 stops...
-
11B-505.5 Clearance
[2010 ADA Standards] 505.5 Clearance. Clearance between handrail gripping surfaces and adjacent surfaces shall be 1½ inches (38 mm) minimum....
-
11B-505.5 Clearance
[2010 ADA Standards] 505.5 Clearance. Clearance between handrail gripping surfaces and adjacent surfaces shall be 1½ inches (38 mm) minimum....
-
6.5
6.5    Each wheelchair space shall comply with the size requirements set forth in § 4.33.2 of the Standards, be level and satisfy the floor surface requirements as set forth in § 4.33.4...
-
§ 36.304(d)(2)(i)
that have not been altered in existing facilities on or after March 15, 2012 and that comply with the corresponding technical and scoping specifications for those elements in the 1991 Standards...
-
APPENDIX D
PROPOSED ASTM INTERNATIONAL STANDARD Computing Pathway Roughness Index from Longitudinal Profile Measurements1 1This standard practice is under the jurisdiction of ASTM Committee...
-
§1630.1(c)(1) In general
Except as otherwise provided in this part, this part does not apply a lesser standard than the standards applied under title V of the Rehabilitation Act of 1973 (29 U.S.C. 790-794a, as amended...
-
§ 35.151(c)(5)(ii)
(ii) Newly constructed or altered facilities or elements covered by §§35.151(a) or (b) that were constructed or altered before March 15, 2012 and that do not comply with the 1991 Standards...
-
MAKING THE BUILT ENVIRONMENT ACCESSIBLE
The ADA’s regulations and the ADA Standards for Accessible Design, originally published in 1991, set the standard for what makes a facility accessible....
-
Homeless Shelters, Group Homes, and Similar Social Service Establishments
Section 233 of the 2010 Standards includes specific scoping and technical provisions that apply to new construction and alteration of residential facilities....
-
3.3 Data Sources
3.3 Data Sources As noted above, MDE Advisory Committee utilized their own expertise in deliberations about accessibility standard specifications....
-
3.3.8 Knee Clearance Depth, minimum
The results of our study suggest that a large percentage of WhMD users are not accommodated by the standards....
-
General
The 1991 Standards at sections 4.1.3(9); 4.1.6(1)(g); and 4.3.10 establish scoping and technical requirements for accessible means of egress....
-
III-5.3000 Application of ADAAG
In such cases, the ADAAG standards should be applied to the extent possible. Where appropriate technical standards exist, they should be applied....
-
12201(a) In General
.-- Except as otherwise provided in this Act, nothing in this Act shall be construed to apply a lesser standard than the standards applied under title V of the Rehabilitation Act of 1973...
-
d-i
[ADA Standards § 4.8.2]    Yes    No Note: For existing ramps, the slope may be 1:10 for a 6-inch rise and 1:8 for a 3-inch rise in special circumstances]....
-
12201(a) In general
(a) In general Except as otherwise provided in this chapter, nothing in this chapter shall be construed to apply a lesser standard than the standards applied under title V of the Rehabilitation...
-
1.1.9 Effective date of this code
Only those standards approved by the California Building Standards Commission that are effective at the time an application for building permit is submitted shall apply to the plans and...
-
1.1.9 Effective date of this code
Only those standards approved by the California Building Standards Commission that are effective at the time an application for building permit is submitted shall apply to the plans and...
-
TownSteel MS Series, Grade 1 with "L" Rose Mortise Locks
The MS series Mortise Lock is designed for High Traffic commercial areas such as schools, universities, office buildings and industrial complexes....
