- Dispersal of wheelchair seating areas in theaters will be required only where there are more than 300 seats, rather than in all cases....
Search Results "Seat Designation"
-
Dispersion of Wheelchair Seating Areas (Section-By-Section Analysis and Response to Comments)
-
Does a wheelchair user have to use the seat belt and shoulder harness?
Transit operators may establish a policy that requires the seat belt and shoulder harness to be used by all riders, including those who use wheelchairs as well as those who use vehicle seats...
-
§ 35.138(h) Prevention of fraud in purchase of tickets for accessible seating
(h) Prevention of fraud in purchase of tickets for accessible seating....
-
Clear floor space at Lav
Terry, You should identify the minimum dimensions of the clear floor space at the Lav.
-
Does a wheelchair user have to use the seat belt and shoulder harness?
Transit operators may establish a policy that requires the seat belt and shoulder harness to be used by all riders, including those who use wheelchairs as well as those who use vehicle seats...
-
Wheelchair seating locations must be provided in all areas
• Wheelchair seating locations must be provided in all areas including sky boxes and specialty areas....
- Rehabilitation Engineering Research Center on Accessible Public Transportation
- ACO Linear QuARTz Drain Design Features and Installation Video
-
Alternative Designs. Bathroom as Shower Room
Alternative Designs. Bathroom as Shower Room....
-
§ 35.138(h) Prevention of fraudulent purchase of accessible seating
(h) Prevention of fraudulent purchase of accessible seating. A public entity may not require proof of disability before selling a wheelchair space....
-
M305.2.2.1 End Transfer Supports
Transfer supports for transfer surfaces complying with M301.2.3.1 and M305.2.2.1 shall be 15 inches (380 mm) long minimum. Transfer supports shall be positioned along 13 ½ inches...
-
M305.2.4.1 Circular Cross Section
Transfer supports with circular cross sections shall have an outside diameter of 1 ¼ inches (32 mm) minimum and 2 inches (51 mm) maximum.
-
M305.2.1.2 Side Transfer Supports
Transfer supports for transfer surfaces complying with M301.2.3.2 shall be capable of supporting transfer on each side of the transfer surface.
-
M305.2.1.1 End Transfer Supports
Transfer supports for transfer surfaces complying with M301.2.3.1 and M302.2 shall be located on the short side (length) opposite the transfer side.
-
M305.2.2.2 Side Transfer Supports
Transfer supports for transfer surfaces complying with M301.2.3.2 shall be 28 inches (710 mm) long minimum and shall be positioned along the width of transfer...
-
Requirement 6 -- Reinforced Walls for Grab Bars
[See subsections ...]
-
Design Guidelines for Environmental Illness
There is no statutory authority for the Department to create the type of design and construction standards suggested by the commenters....
-
407.4.7 Designations and Indicators of Car Controls
Designations and indicators of car controls shall comply with 407.4.7....
-
407.4.7 Designations and Indicators of Car Controls
Designations and indicators of car controls shall comply with 407.4.7....
-
1991 ADA Standards for Accessible Design
Justice 28 CFR Part 36 Nondiscrimination on the Basis of Disability by Public Accommodations and in Commercial Facilities Excerpt from 28 CFR Part 36: ADA Standards for Accessible Design...
-
Planning and Designing Outdoor Recreation Facilities for Horses
"Equestrian Design Guidebook for Trails, Trailheads, and Campgrounds," a comprehensive technical resource, details those elements of planning, design, and construction that are specific...
-
4.3.9 Doorway Design
4.3.9 Doorway Design We did not obtain quantitative data on performance in our door use research. Thus there are no accommodation models for this topic....
-
United States of America v. Quiktrip Corporation - Consent Decree
IN THE UNITED STATES DISTRICT COURT FOR THE DISTRICT OF NEBRASKA Omaha Division THE UNITED STATES OF AMERICA, Plaintiff, v. QUIKTRIP...