., concrete, brick, flagstone) serving primary entry doors and required exit doors are limited to not more than 1/2 inch (12.7 mm) of change in height between floor surfaces....
Search Results "Adjustable Height Counter"
-
11B-809.8 Doors
-
Examination Tables and Chairs Subcommittee Report
Examination Tables and Chairs Subcommittee Report (including height position discussions as requested by full committee) May 28, 2013...
-
11B-409.4.7.2 Operable parts
The telephone and emergency signaling device shall comply with Sections 11B-309.3 _|Operable Parts; Height|_ and 11B-309.4 _|Operation|_....
-
11B-409.4.7.2 Operable parts
The telephone and emergency signaling device shall comply with Sections 11B-309.3 _|Operable Parts; Height|_ and 11B-309.4 _|Operation|_....
-
§ 37.43(e)(2)(iii)
., relocation of phones to an accessible height, installation of amplification devices or TDDs);...
-
11B-703.2.6 Stroke thickness
Stroke thickness of the uppercase letter “I” shall be 15 percent maximum of the height of the character....
-
11B-809.9.5 Lower shelving
Lower shelving and/or drawer space shall be provided at a height of 48 inches (1219 mm) maximum above the finish floor....
-
§382.145(a)
instructional materials provided for the carrier and contract personnel who provide services to passengers, including, but not limited to, pilots, flight attendants, reservation and ticket counter...
-
Comments on specific provisions of proposed ADAAG (Preamble, Section-by-Section Analysis)
Strenuous objections were raised by some business commenters to the proposed provisions of the guidelines concerning check-out aisles, counters, and scoping for hotels and nursing facilities...
-
5.8.2.7 Base Support Allowance Recommendation
To discuss the maximum base support height, the sub-committee looked at anthropomorphic data regarding footrest heights....
-
SLOPE Waste Receptacles
Available in both a standard height 38-gallon and a “junior height” 32-gallon unit, SLOPE features 3 single top openings [waste, recycling & paper] and 5 double-top openings [combinations...
-
703.6.1 Pictogram Field
Pictograms shall have a field height of 6 inches (150 mm) minimum. Characters and braille shall not be located in the pictogram field....
-
703.6.1 Pictogram Field
Pictograms shall have a field height of 6 inches (150 mm) minimum. Characters and braille shall not be located in the pictogram field....
-
4.34.6.5(2)
(2) Rough-in plumbing shall be located to accept connections of supply and drain pipes for sinks mounted at the height of 28 in (710 mm)....
-
1133A.5 Lower shelving
Lower shelving and/or drawer space shall be provided in the kitchen at a height of no more than 48 inches (1219 mm) above the floor....
-
1133A.5 Lower shelving
Lower shelving and/or drawer space shall be provided in the kitchen at a height of no more than 48 inches (1219 mm) above the floor....
-
Release of unsold accessible seats. (Section-by-Section Analysis)
These options provide flexibility so that ticketing policies can be adjusted according to the venue size and event type....
-
220.1 General
Where automatic teller machines or self-service fare vending, collection, or adjustment machines are provided, at least one of each type provided at each location shall comply with 707....
-
What is a “reasonable accommodation”?
A “reasonable accommodation” is any modification or adjustment to a job, the job application process, or the work environment that will enable a qualified applicant or employee with a disability...
-
Fire Rings, Grills, Fireplaces, and Woodstoves [1011.2, 1011.3, and 1011.5]
The cooking surface of pedestal grills may be adjustable beyond the required range, but must include adjustments within the specified range....
-
220 Automatic Teller Machines and Fare Machines
Where automatic teller machines or self-service fare vending, collection, or adjustment machines are provided, at least one of each type provided at each location shall comply with 707....
-
703.5.9 Line Spacing
Spacing between the baselines of separate lines of characters within a message shall be 135 percent minimum and 170 percent maximum of the character height....
-
R410.8 Stroke Thickness
Stroke thickness of the uppercase letter "I" shall be 10 percent minimum and 30 percent maximum of the height of the character....
-
T702.7 Line Spacing
Spacing between the baselines of separate lines of characters within a message shall be 135 percent minimum and 170 percent maximum of the character height....
