Certifications ANSI/BHMA A156.3 Series Grade 1 UL/cUL listed (3-hours) for "A" label single door applications (4' x 8') UL10C/UBC 7-2 (1997) Positive Pressure Rated UL10B Pressure...
Search Results "Tempered Glass Door"
-
Stanley QED 100 Series Grade 1 Extra Heavy Duty Exit Devices
-
Behavioral Safety Products #DH410 Cylindrical Ligature Resistant Lever Handle
The escutcheon plate is sloped at a low profile, from the door to the lever handle itself, to eliminate any further ligature points, and maintains extremely tight tolerances. ...
-
Allegion Falcon 1990 Series Cross Bar Exit Devices
: Hex dogging standard Cylinder: Rim, key entry (NL) or hold back (HB) available (field selectable) Sizes: Field adjustable width, 41" crossbar standard fits 3' 8" x 7' door...
-
DORMA 8000 Series Exit Device
For paired doors where a full-width opening is only occasionally required, removable mullions are used. Doors are fitted with rim exit devices and normally function as single doors....
-
Figure 404.2.4.1(g) Maneuvering Clearances at Manual Swinging Doors and Gates: Hinge Approach, Push Side with Closer and Latch – Drawing from the U.S. Access Board
-
Allegion Von Duprin 55 Series Cross Bar Exit Devices
5575 mortise lock devices for all types of single and double doors. UL listed for accident hazard installations....
-
TownSteel TS8000 Grade 2 Fire Rim Device
SPECIFICATION Application For single or double door Door Thickness 1-3/8" - 2", specify when other than 1-3/4" Device Length 36" for 30" to 36" wide openings 48" for 36" to 48"...
-
7(2)(a)
(a) Bathrooms that have reinforced walls for grab bars (see Requirement 6) would meet section 100.205(c)(3)(iv) if: Note: Cabinets under lavatories are acceptable provided the...
-
§100.205(c)
(c) All covered multifamily dwellings for first occupancy after March 13, 1991 with a building entrance on an accessible route shall be designed and constructed in such a manner that—
-
The Perils Of Slope
Requires the Registered User plan or above. Login! -
Allegion Falcon 2390 Series Recessed Exit Device
The best available recessed concealed device for stile and rail doors....
-
1134A.6 Showers
Glazing used in doors and panels of shower enclosures shall be fully tempered, laminated safety glass or approved plastic....
-
Yale 1500 Series Traditional Exit Devices
Lever, knob, handle and pull trim designs offer variety and permit hardware balance throughout a building 2-point hex-key dogging for standard devices allows quiet push-pull door...
-
TownSteel ED5500F Grade 1 Fire Rim Device
SPECIFICATIONS Application For single or double door with or without mullion Door Thickness 1-3/4" standard Backset 2-3/4" Device Length 36" for 2'6' to 3' wide openings 48" for...
-
Allegion Von Duprin 88 Series Cross Bar Exit Device
Exit devices are a critical part of a door opening or access system and will provide safe and reliable service when properly applied and maintained....
-
Allegion Falcon 1790 Series Exit Devices
standard, except EL where must use hold back feature Cylinder: Rim, key entry (NL) or hold back (HB) available (field selectable) Sizes: 30", 36", 42", and 48" Doors...
-
Allegion Falcon 1490 Series Exit Devices
Sizes: 36", 42", 48" Doors: 1 3/4" thick metal doors-specify if other than 1 3/4" Projections: 2 3/4" maximum, 2" when dogged....
-
TownSteel ED5500 Grade 1 Panic Rim Device
SPECIFICATIONS Application For single or double door with or without mullion Door Thickness 1-3/4" standard Backset 2-3/4" Device Length 36" for 2'6' to 3' wide openings 48" for...
-
Road Closure Drawings
Many forest roads are closed to motor vehicle traffic by gates or other types of barriers. Often, foot travel is allowed beyond the restriction device. When foot travel is encouraged...
-
T204.2 Doorways with Lifts, Ramps or Bridgeplates
Doorways with lifts or ramps shall comply with T502.2.
-
Allegion Falcon 1690 Series Exit Devices
The vertical rods and latch mechanisms are concealed in the vertical door stile, ensuring trouble-free operation. Cast metal cover plates and end caps hold up to rigorous use....
-
11B-804.6.5.2 Bottom-hinged door ovens
Bottom-hinged door ovens shall have the work surface required by Section 11B-804.3 positioned adjacent to one side of the door....
