The grab bar reinforcement shall be 8 inches (203 mm) minimum in height. b....
Search Results "Drinking Fountain Spout Height"
Filters
Commonly Searched Documents
-
11B-809.10.5.2 Reinforcement for grab bars
-
810.5.3 Platform and Vehicle Floor Coordination
The height and position of a platform must be coordinated with the floor of the vehicles it serves to minimize the vertical and horizontal gaps, in accordance with the ADA Accessibility...
-
Reach Ranges (Advisory)
Appropriate reach range heights will vary depending on how the play component is accessed. ...
-
307 Protruding Objects
Several commenters called for the 27 inch triggering height to be reduced. Recommendations ranged from 15 to 6 inches....
-
810.5.3 Platform and Vehicle Floor Coordination
The height and position of a platform must be coordinated with the floor of the vehicles it serves to minimize the vertical and horizontal gaps, in accordance with the ADA Accessibility...
-
10.3.1(9)
(9) In stations covered by this section, rail-to-platform height in new stations shall be coordinated with the floor height of new vehicles so that the vertical difference, measured when...
-
Edge Protection [4.8.7]
Horizontal rails are another alternative although mounting heights are not specified (the 27 inch height in ADAAG Figure 17 pertains to the return of extensions as protruding objects)....
-
Gurney Accessible Bathroom
wall for shower gurney access Vanity remodeled to clear the space for wheelchair users Hand-held shower 6’ hose on shower Shower heads at four different heights...
-
§ 38.175(a)
design of cars shall be coordinated with the boarding platform design such that the horizontal gap between a car door at rest and the platform shall be no greater than 3 inches and the height...
-
1134A.6, Item 4
The grab bar reinforcement shall be a minimum of 6 inches (152.4 mm) nominal in height. ...
-
1132A.4.1 Thresholds
Changes in height at interior door thresholds (e.g., floor material changes at door thresholds) shall not exceed ½ inch (12.7 mm). Thresholds shall comply with the following:...
-
1134A.6, Item 4
The grab bar reinforcement shall be a minimum of 6 inches (152.4 mm) nominal in height....
-
§ 38.153(c)(1)
(1) Doors shall have a minimum clear width when open of 30 inches (760 mm), measured from the lowest step to a height of at least 48 inches (1220 mm), from which point they may taper to...
-
11B-809.10.6.4 Reinforcement for grab bars
The grab bar reinforcement shall be 8 inches (203 mm) minimum in height....
-
11B-605.4 Flush controls
Hand operated flush controls shall comply with Section 11B-309 except that the flush control shall be mounted at a maximum height of 44 inches (1118 mm) above the finish floor....
-
American Standard Soltura 1 Handle Pull Down High Arc Kitchen Faucet with Soap Dispenser 9391.301
Features include a swivel spout, pull-down spray with push-button activation, memory position valving that provides water at your preferred temperature, an ADA-approved lever handle and...
-
Grohe Essence New Lavatory Centerset M-Size
cartridge • GROHE StarLight® finish • GROHE EcoJoy® Mousseur 1.5 gpm • GROHE QuickFix® Plus installation system • Single hole installation • With temperature limiter • Swivel tubular spout...
-
Whitehall Mfg. 3374-WSF Hot & Cold Hemispherical Widespread Pushbuttons Pneumatic Valve Conical Faucet
As loose components, the spout and pushbutton may be installed with any centerset spacing, however, 4", 6" or 8" centersets are suggested....
-
Grohe Essence Single-Lever Basin Mixer L-Size
• GROHE StarLight® finish • GROHE SilkMove® ceramic cartridge • Single hole installation • Adjustable flow rate limiter • Swivel tubular spout with stop limiter • Integrated flow...
-
Measures and Procedures
Measures and Procedures A custom-built modular, transfer station was designed and built and consisted of a height adjustable platform capable of a range between 10” to 29” with increments...
-
1132A.4.1 Thresholds
Changes in height at interior door thresholds (e.g., floor material changes at door thresholds) shall not exceed ½ inch (12.7 mm). Thresholds shall comply with the following:...
-
Accessible Courtroom Stations
Other applicable specifications include accessible work surface heights and toe and knee clearance....
-
607 Bathtubs
Changes made to this section include: revision of grab bar mounting heights (607.4) integration of provisions for grab bars specific to residential dwelling units that were...
-
4.31.2 CLEAR FLOOR OR GROUND SPACE
Figure 44 Mounting Heights and Clearances for Telephones...
