(ii) Internal barriers are present in the aircraft that would preclude passengers who use a boarding or aisle chair from reaching a non-exit row seat....
Search Results "Aisle Ramp"
-
§27.72(e)(3)(ii)
-
11B-812.6.4 Drive-up
Vehicle spaces serving drive-up EVCS shall be 204 inches (5182 mm) wide minimum and shall not be required to have an adjacent access aisle....
-
Must accessible routes or crossings be marked?
The ADA Standards require accessible parking spaces and access aisles to be marked, but they do not require accessible routes, including portions crossing vehicular ways, to be marked....
-
11B-812.6.4 Drive-up
Vehicle spaces serving drive-up EVCS shall be 204 inches (5182 mm) wide minimum and shall not be required to have an adjacent access aisle....
-
Using the Tape Measure
A tape measure is used to measure the length, width, height, and depth of various elements including parking spaces and access aisles, routes, thresholds, doorways, and protruding objects...
-
§ 36.406(f)(4)
(4) In stadium-style movie theaters, wheelchair spaces and companion seats are located on a riser or cross-aisle in the stadium section that satisfies at least one of the following criteria...
-
Vertical clearance and protruding objects
• Entrances and aisles with adequate head clearance and minimal projections into the path of travel result in easier navigation for people with lessened visual acuity or those who may be...
-
2. Protruding Objects
Protruding Objects 4.4 Accessible routes or maneuvering space including, but not limited to halls, corridors, passageways, or aisles....
-
§ 35.151(g)(4)
(4) Stadium-style movie theaters locate wheelchair seating spaces and companion seating on a riser or cross-aisle in the stadium section that satisfies at least one of the following criteria...
-
§ 35.151(g)(4)
(4) Stadium-style movie theaters shall locate wheelchair spaces and companion seats on a riser or cross-aisle in the stadium section that satisfies at least one of the following criteria...
-
11B-705.1.1.4 Resiliency
Exception: Detectable warning surfaces at curb ramps, islands or cut-through medians shall not be required to comply with Section 11B-705.1.1.4....
-
11B-705.1.1.4 Resiliency
Exception: Detectable warning surfaces at curb ramps, islands or cut-through medians shall not be required to comply with Section 11B-705.1.1.4....
-
Gaps: ADA Standard Section 1002.4.3
EXCEPTION: Where compliance is not operationally or structurally feasible, ramps, bridge plates, or similar devices complying with the applicable requirements of 36 CFR 1192.83(c) shall...
-
§382.65(c)(2)
(2) The chair must be designed to be compatible with the maneuvering space, aisle width, and seat height of the aircraft on which it is to be used, and to be easily pushed, pulled, and turned...
-
§ 36.406(f)(4)
(4) Stadium-style movie theaters shall locate wheelchair seating spaces and companion seating on a riser or cross-aisle in the stadium section that satisfies at least one of the following...
-
11B-812.7.3 Lettering
The words “NO PARKING” shall be painted on the surface within each access aisle in letters a minimum of 12 inches (305 mm) in height and located to be visible from the adjacent vehicular...
-
11B-812.7.3 Lettering
The words “NO PARKING” shall be painted on the surface within each access aisle in letters a minimum of 12 inches (305 mm) in height and located to be visible from the adjacent vehicular...
-
DRIVEWAY
A driveway may provide access to drive aisles in a parking facility....
-
406.8 Detectable Warnings
The detectable warning shall extend the full width of the curb ramp (exclusive of flared sides) and shall extend either the full depth of the curb ramp or 24 inches (610 mm) deep minimum...
- Armor-Tile Tactile Systems Surface Applied Systems
-
§382.81(d)
(d) For a passenger with a fused or immobilized leg, you must provide a bulkhead seat or other seat that provides greater legroom than other seats, on the side of an aisle that better accommodates...
-
XI. Overview of Americans with Disabilities Act Accessibility Guidelines for New Construction and Alterations
The Guidelines contain general design ("technical") standards for building and site elements, such as parking, accessible routes, ramps, stairs, elevators, doors, entrances, drinking fountains...
-
11B-502.5 Vertical clearance
Parking spaces, access aisles and vehicular routes serving them shall provide a vertical clearance of 98 inches (2489 mm) minimum. [2010 ADAS] 502.5 Vertical Clearance. ...