Strength: Bars with a 1 1/2" offset clearance will support loads in excess of 900lbs when properly installed....
Search Results "Maneuvering Clearance (Alcove)"
-
AJW Architectural Products UG30-Railing UG30X-Y108 108" Concealed Set Screw Flange, 1.5" Diameter, Peened Grip - Configuration Y
-
Pilot Rock RT Series End Accessible Recycled Plastic Picnic Table
This design meets or exceeds the current ADA guidelines for wheelchair accessibility and provides wheelchair access at one end (30" wide, 27" under table top and 19" knee plus 5" toe clearances...
-
AJW Architectural Products UG20-Railing UG20X-Y108 108" Concealed Set Screw Flange, 1.25" Diameter, Peened Grip - Configuration Y
Strength: Bars with a 1 1/2" offset clearance will support loads in excess of 900lbs when properly installed....
-
ASI Global Partitions High Density Polyethylene Solid Plastic Toilet Partitions
Vandal-Resistant Fasteners Special driver installs fasteners which virtually eliminates unauthorized removal and ensures easy installation. 55” High Doors and Panels 14” clearance from...
-
AJW Architectural Products UG2-A Series UG2-A12 12" Concealed Snap Flange, 1.25" Diameter Grab Bar - Configuration A
Strength: Bars with a 1 1/2" offset clearance will support loads in excess of 900lbs when properly installed....
-
AJW Architectural Products UG120-A Series UG120-A12 12" Exposed Flange, 1.25" Diameter Grab Bar - Configuration A
Strength: Bars with a 1 1/2" offset clearance will support loads in excess of 900lbs when properly installed....
-
1129B.3, Item 2
The vertical clearance at such spaces shall comply with 4.6.5. All such spaces may be grouped on one level of a parking structure....
-
R402 Protruding Objects (Section-by-Section Analysis)
Guardrails or other barriers to pedestrian travel must be provided where the vertical clearance on pedestrian circulation paths is less than 2 meters (6.7 feet) high....
-
Maintenance of Accessible Features
The trashcan in an accessible toilet room must not be placed in the required clearances at the door and fixtures....
-
Protruding Objects and Outdoor Recreation Access Routes
Provide and maintain clearance from natural elements around outdoor recreation access routes in accordance with your unit's standards, keeping in mind overhanging hazards to people who are...
-
208 Parking Spaces
The vertical clearance at such spaces shall comply with 4.6.5. All such spaces may be grouped on one level of a parking structure....
-
ASME A18.1 Safety Standard [§410.1]
The ASME A18.1 Standard addresses requirements for runway enclosures, electrical equipment and wiring, structural support, headroom clearance (80” minimum), access ramps, pits, and other...
-
Applying the Accessibility Standards to the Plan, Installation, and Maintenance of Ground Level Accessible Routes for Playgrounds
Is the vertical clearance a minimum of 80 inches for the ground level accessible route?...
-
4.2 Stretchers
Another component is the 6" high lift clearance window that forces foot operated controls up....
-
Regulatory Impact Analysis.
each of the following eight existing elements will exceed monetized benefits by more than $100 million when using the 1991 Standards as the comparative baseline: Side reach; water closet clearances...
-
Regulatory Impact Analysis.
each of the following eight existing elements will exceed monetized benefits by more than $100 million when using the 1991 Standards as the comparative baseline: side reach; water closet clearances...
-
Restaurants and Lounges
Restaurants and Lounges When a guest who is blind or who has low vision is entering, leaving, or maneuvering through a restaurant, you should offer to provide assistance using the techniques...
-
Bathroom
To specify space for wheelchair maneuvering in a powder room would, in most cases, require enlarging the room significantly....
-
1134A.8 Lavatories, vanities, mirrors and towel fixtures
A clear maneuvering space at least 30 inches by 48 inches (762 mm by 1219 mm) shall be provided at lavatories and shall be centered on the lavatory. 3. Cabinets....
-
AJW Architectural Products UG30-A Series UG30-A12 12" Concealed Set Screw Flange, 1.5" Diameter Grab Bar - Configuration A
Strength: Bars with a 1 1/2" offset clearance will support loads in excess of 900lbs when properly installed....
-
Activar Hiawatha HG111 & HG112 Straight Tubular Pulls and HG113 & HG114 Push Bars
Brass, Bronze, Stainless Steel Pull Diameter: 1-1/4" CTC: 12", 18", 27-3/4", 33" Overall: 13-3/4", 19-1/4", 29" Push Bar, 34-1/4" Push Bar Projection: 3", 3", 2-1/2", 2-1/2" Clearance...
-
AJW Architectural Products UG20-A Series UG20-A12 12" Concealed Set Screw Flange, 1.25" Diameter Grab Bar - Configuration A
Strength: Bars with a 1 1/2" offset clearance will support loads in excess of 900lbs when properly installed....
-
Door King Inc. 1150 Overhead Gate and Door opener
Low profile ideal for low clearance underground parking areas Shock mounts greatly reduce noise and vibration from being transferred into above offices or apartments Direct drive limit...
