Receivers required for use with an assistive listening system shall include a 1/8 inch (3.2 mm) standard mono jack....
Search Results "Enhanced 9-1-1"
Filters
Commonly Searched Documents
-
11B-706.2 Receiver jacks
-
11B-1002.4.2 Slope
The floor or ground surface of wheelchair spaces shall have a slope not steeper than 1:48 when in the load and unload position....
-
Willoughby Industries HS-1014-96-HC 18" wide Lavatory
Standard lavatory shall include: rectangular-shaped bowl, 14 1/2" x 9 1/2" x 5 1/2" deep, fast drain with air vent, elbow waste (1 1/2" F.I.P.) and self-draining soap dish....
-
DISABILITY
(a)(1)(i) of this section, the “record of” prong in paragraph (a)(1)(ii) of this section, or the “regarded as” prong in paragraph (a)(1)(iii) of this section....
-
11B-306.3.3 Minimum required depth
Where knee clearance is required under an element as part of a clear floor space, the knee clearance shall be 11 inches (279 mm) deep minimum at 9 inches (229 mm) above the finish floor...
-
Universal Design in Practice
Universal Design in Practice 1. Look at the Big Picture 2. Read the Requirements 3. Don't Assume What Future Users Can't Do 4. Find the Right Products 5....
-
Scope: ADA Standard Section 901.1
The provisions of Chapter 9 shall apply where required by Chapter 2 or where referenced by a requirement in this document....
-
11B-901.1 Scope
The provisions of Division 9 shall apply where required by Division 2 or where referenced by a requirement in this chapter....
-
Floor or Ground Surfaces: ADA Standard Section 304.2
Section 304.2 covers the current ADA Standards for the ground surfaces of a turning space.
-
Amusement Rides with Wheelchair Spaces
If possible, designers and manufacturers should incorporate more space to enhance the ease of loading and unloading and to accommodate a greater variety of personal mobility devices....
-
11B-101.1 General
The requirements are to be applied during the design, construction, additions to, and alteration of sites, facilities, buildings, and elements to the extent required by Chapter 1, Section...
-
11B-502.4 Floor or ground surfaces
Changes in level, slopes exceeding 1:48, and detectable warnings shall not be permitted. Exception: Reserved. Advisory 11B-502.4 Floor or ground surfaces....
-
11B-405.7.1 Slope
Changes in level, slopes exceeding 1:48, and detectable warnings shall not be permitted. Exception: Reserved....
-
11B-208.2 Minimum number
PARKING SPACES TOTAL NUMBER OF PARKING SPACES PROVIDED IN PARKING FACILITY MINIMUM NUMBER OF REQUIRED ACCESSIBLE PARKING SPACES 1...
-
Boat Slips
Number of Accessible Boat Slips Required Total Boat Slips in Facility Minimum Accessible Slips 1 to 25 1 26 to 50 2 51 to...
-
Step 3: Apply the Accessibility Provisions
First, look at the existing conditions on the ground and determine whether the trail alignment complies with the required running slopes of a maximum of 1:20 (5 percent) for any distance...
-
11B-208.2 Minimum number
TABLE 11B-208.2 PARKING SPACES Total Number Of Parking Spaces Provided In Parking Facility Minimum Number Of Required Accessible Parking Spaces 1 to...
-
Circular Cross Section: ADA Standard Section 609.2.1
Section 609.2.1 covers the current ADA Standards for circular grab bar cross sections.
-
Floor or Ground Surface: ADA Standard Section 802.1.1
EXCEPTION: Slopes not steeper than 1:48 shall be permitted....
-
11B-504.4 Tread surface
Changes in level, slopes exceeding 1:48, and detectable warnings shall not be permitted. Exception: Reserved....
-
11B-609.2.1 Circular cross section
Grab bars with circular cross sections shall have an outside diameter of 1¼ inches (32 mm) minimum and 2 inches (51 mm) maximum....
-
a) Public Right-of-Way
RT 826:8-24, 829:1-2....
-
21. Please indicate the typical slope the particular trail has prior to trail installation
Please indicate the typical slope the particular trail has prior to trail installation: Up to 5% Between 5% (1:20) and 8.33% (1:12) Between 8.33% (1:12) and 10% (1:10) Between 10%...
-
ADA Basic Building Blocks Course - Project of the ADA National Network
Explain each nondiscrimination requirement using 1-2 real-life examples. Identify the defenses or limitations of each nondiscrimination requirement....
