When the running slope of a walking surface exceeds 5%, it must comply with the accessibility requirements for ramps....
Search Results "Curb Ramp Bottom Landing"
-
11B-403.3 Slope
-
§ 36.311(c)(3)
(3) The risk of harm to the environment or natural or cultural resources or conflict with Federal land management laws and regulations; and...
-
§ 35.137(c)(3)
(3) The risk of harm to the environment or natural or cultural resources or conflict with Federal land management laws and regulations; and...
-
Public Right-of-Way
Public land or property, usually in interconnected corridors, that is acquired for or dedicated to transportation purposes....
-
804.6.2 Operable Parts
Bottom-hinged appliance doors, when in the open position, shall not be required to comply with 309.3....
-
4.19.2 Height and Clearances
Provide a clearance of at least 29 in (735 mm) above the finish floor to the bottom of the apron. Knee and toe clearance shall comply with Fig. 31....
-
11B-809.10.8.7 Mirrors and towel bars
Where mirrors are provided the bottom edge of the reflective surface shall be 40 inches (1016 mm) maximum above the finish floor....
-
11B-221.4 Designated aisle seats
For example, an assembly area has two aisles (A and B) serving seating areas with an accessible route connecting to the top and bottom of Aisle A only....
-
221.4 Designated Aisle Seats
For example, an assembly area has two aisles (A and B) serving seating areas with an accessible route connecting to the top and bottom of Aisle A only....
-
11B-221.4 Designated aisle seats
For example, an assembly area has two aisles (A and B) serving seating areas with an accessible route connecting to the top and bottom of Aisle A only....
-
11B-221.4 Designated aisle seats
For example, an assembly area has two aisles (A and B) serving seating areas with an accessible route connecting to the top and bottom of Aisle A only....
-
Single Occupant Structures (§203.6)
Single Occupant Structures (§203.6) Single occupant structures accessed only by below-grade passageways or elevated above standard curb height Examples: toll booths that are accessed...
-
11B-409.4.3 Platform to hoistway clearance
The clearance between the car platform and the edge of any landing sill shall be 1½ inch (38 mm) maximum....
-
409.4.3 Platform to Hoistway Clearance
The clearance between the car platform and the edge of any landing sill shall be 1-½ inch (38 mm) maximum....
-
504.7 Wet Conditions
Stair treads and landings subject to wet conditions shall be designed to prevent the accumulation of water....
-
Do limits on protruding objects apply to stairways?
Yes, requirements for protruding objects are not limited to accessible routes and apply to all circulation paths, including stairways and their landings....
-
11B-409.4.3 Platform to hoistway clearance
The clearance between the car platform and the edge of any landing sill shall be 1½ inch (38 mm) maximum....
-
68.10(22) Public Right-of-Way
(22) Public Right-of-Way--Public land or property, usually in interconnected corridors, that is acquired for or dedicated to transportation purposes....
-
11B-409.4.3 Platform to hoistway clearance
The clearance between the car platform and the edge of any landing sill shall be 1½ inch (38 mm) maximum....
-
11B-106.5 Defined terms
SPORT ACTIVITY ASSEMBLY AREA ASSISTIVE LISTENING SYSTEM (ALS) AUTOMATIC DOOR AUTOMATIC TELLER MACHINE (ATM) BATHROOM BLENDED TRANSITION BOARDING PIER BOAT LAUNCH RAMP...
-
R208 Detectable Warning Surfaces (Section-by-Section Analysis)
On pedestrian access routes, detectable warning surfaces indicate the boundary between a pedestrian route and a vehicular route where there is a flush rather than a curbed connection for...
-
4. Comparison of Proposed Technical Provisions Applicable to Shared Use Paths and AASHTO Guide
In shared use paths, the width of curb ramps runs and blended transitions shall be equal to the width of the shared use path. R305.1.4 Size....
-
Eliminating Hazards [4.26.4]
Extensions with bottom edges within 27 inches of the floor are detectable within the standard sweep of canes....
-
11B-804.6.2 Operable parts
Bottom-hinged appliance doors, when in the open position, shall not be required to comply with Section 11B-309.3....