ETA Editor's Note The CBC 11B-603.5 limitation on the height of accessories at toilet rooms is more stringent than 2010 ADAS....
Search Results "Closer Height"
-
11B-603.5 Accessories
-
11B-803.1 General
Section 903.5 requires dressing room bench seats to be installed so that they are at the same height as a typical wheelchair seat, 17 inches (430 mm) to 19 inches (485 mm)....
-
11B-803.1 General
Section 11B-903.5 requires dressing room bench seats to be installed so that they are at the same height as a typical wheelchair seat, 17 inches (430 mm) to 19 inches (485 mm)....
-
11B-603.5 Accessories
ETA Editor's Note The CBC 11B-603.5 limitation on the height of accessories at toilet rooms is more stringent than 2010 ADA Standards....
-
11B-208.2 Minimum number
For example, accessible spaces required for outlying parking facilities may be located in a parking facility closer to an accessible entrance....
-
Issue 3: Which signal? Speech WALK messages necessary
With two APS located closer than five feet to each other, it is impossible to distinguish which one is sounding based on the location and direction of the sound....
-
Location
Devices must be located a minimum of 3m (10 feet) apart, no more than 3m (10 feet) maximum from the curb line (and closer, if possible), and between the curb ramp landing and the outside...
-
Opening Force [§404.2.9]
Otherwise, closers should be calibrated with the least force necessary for closure to minimize the opening force. ...
-
11B-208.2 Minimum number
For example, accessible spaces required for outlying parking facilities may be located in a parking facility closer to an accessible entrance....
-
Service Counters
If we look at 11B-904.4.1, we see that a 36” minimum long section of the counter needs to be installed at 34” maximum height. ...
-
Door and Gate Surfaces: ADA Standard Section 404.2.10
Section 404.2.10 covers the current ADA Standards for door and gate surfaces on manual doors and gates.
-
11B-404.2.10 Door and gate surfaces
stiles and having a bottom rail or shoe with the top leading edge tapered at 60 degrees minimum from the horizontal shall not be required to meet the 10 inch (254 mm) bottom smooth surface height...
-
11B-703.3.1 Dimensions and capitalization
dots in the same cell1 0.100 (2.5 mm) Distance between corresponding dots in adjacent cells1 0.300 (7.6 mm) Dot height...
-
1010.2.13.1 Delayed egress locking system
Sign lettering shall be at least 1 inch (25 mm) in height and shall have a stroke of not less than 1/8 inch (3.2 mm). 6.4....
-
1010.2.12.1 Delayed egress locking system
Sign lettering shall be at least 1 inch (25 mm) in height and shall have a stroke of not less than 1/8 inch (3.2 mm). 6.4....
-
11B-404.2.10 Door and gate surfaces
stiles and having a bottom rail or shoe with the top leading edge tapered at 60 degrees minimum from the horizontal shall not be required to meet the 10 inch (254 mm) bottom smooth surface height...
-
11B-703.3.1 Dimensions and capitalization
dots in the same cell1 0.100 (2.5 mm) Distance between corresponding dots in adjacent cells1 0.300 (7.6 mm) Dot height...
-
Appendix: Revised Annotated Bibliography
Data collected: weight, stature, erect sitting height, normal sitting height, sitting trunk height, sitting knee height, sitting popliteal height, span, span akimbo, forward arm reach, shoulder-elbow...
-
404 Doors, Doorways, and Gates
for user passage (404.2) clarify and modify maneuvering clearance requirements (404.2.4) modify requirements for doors and gates in series (404.2.6) clarify the height...
-
Chapter 9: Built-In Elements
Changes made to this section include: clarification of provisions for benches concerning clear floor or ground space (903.2), back support (903.4), and height (903.5) addition...
-
M303.2.6 Edge Protection (Section-by-Section Analysis)
(Significant Changes – Edge Protection), the final rule requires platforms with wheelchair spaces that are raised more than 1½ inches in height to provide a minimum 2-inch-high edge protection...
-
Handrail Extensions
Handrail Extensions ADAAG addresses handrail height, diameter, and extensions provided to the end of the gangway....
-
Amusement Ride Seats Designed for Transfer
Both the clear space and the height of the seat are critical for a safe and independent transfer....
-
Tent Pads and Tent Platforms [1013]
Tent platforms must also comply with the technical requirements for height....