(B) Location Spaces required by subparagraph (A) shall be located in single-level rail passenger coaches or food service cars....
Search Results "Car Lift"
Filters
Commonly Searched Documents
-
12162(a)(3)(B) Location
-
11B-407.4.3 Platform to hoistway clearance
The clearance between the car platform sill and the edge of any hoistway landing shall be 1¼ inch (32 mm) maximum....
-
§ 38.91(a)
(a) New, used and remanufactured commuter rail cars, to be considered accessible by regulations in part 37 of this title, shall comply with this subpart....
-
11B-407.4.3 Platform to hoistway clearance
The clearance between the car platform sill and the edge of any hoistway landing shall be 1¼ inch (32 mm) maximum....
-
§382.111(d)
(d) Assistance to a semi-ambulatory person in moving to and from the lavatory, not involving lifting or carrying the person; or...
-
12145(a)(2)
(2) the unavailability from any qualified manufacturer of hydraulic, electromechanical, or other lifts for such new buses;...
-
§ 37.203(a)
(a) The entity shall establish a system of regular and frequent maintenance checks of lifts sufficient to determine if they are operative....
-
Bathtubs (ADAAG 4.20)
Resident lifts, which are an alternative means of safely transferring an individual into a tub, were generally discouraged, particularly among people with dementia because the experience...
-
409.4.3 Platform to Hoistway Clearance
The clearance between the car platform and the edge of any landing sill shall be 1 1/2 inch (38 mm) maximum....
-
11B-502.6.4 Marking
Each accessible car and van space shall have surface identification complying with either Section 11B-502.6.4.1 or 11B-502.6.4.2....
-
Vehicle Parking Area
The section of a parking spur where camping vehicles, such as cars, motorcycles, vans, recreational vehicles, and trailers, are parked....
-
11B-502.6.4 Marking
Each accessible car and van space shall have surface identification complying with either Section 11B-502.6.4.1 or 11B-502.6.4.2. ...
-
11B-502.6.4 Marking
Each accessible car and van space shall have surface identification complying with either Section 11B-502.6.4.1 or 11B-502.6.4.2....
-
§382.99(e)
(e) The agreement must ensure that all lifts and other accessibility equipment are maintained in proper working condition....
-
§27.72(d)(3)
(3) The agreement shall ensure that all lifts and other accessibility equipment are maintained in proper working condition....
-
§27.72(c)(2)
(2) The agreement shall ensure that all lifts and other accessibility equipment are maintained in proper working condition....
-
§ 37.163(b)
(b) The entity shall establish a system of regular and frequent maintenance checks of lifts sufficient to determine if they are operative....
-
Works with Nest
Nest now works with all kinds of devices -- lights, appliances, fitness bands, and even cars....
-
T503.5 Exterior Illumination for Boarding and Alighting Areas
Where doorways have ramps, bridgeplates or lifts, the illumination shall be 1 foot-candle (11 lux) minimum for a distance of 3 feet (915 mm) measured beyond the edge of the ramp, bridgeplate...
-
407.4.3 Platform to Hoistway Clearance
The clearance between the car platform sill and the edge of any hoistway landing shall be 1 1/4 inch (32 mm) maximum....
-
DOT Response
The lift is one that exceeds the part 38 design standard, which requires lifts to be able to accommodate a 600-pound wheelchair/passenger combination....
-
Accessible Parking Space Width
The proposed rule specified that car and van spaces be at least 8 feet wide and that access aisles be at least 5 feet wide for car spaces and at least 8 feet wide for van spaces....
-
11B-409.4.4 Leveling
Each car shall automatically stop at a floor landing within a tolerance of ½ inch (12.7 mm) under rated loading to zero loading conditions....
-
409.4.4 Leveling
Each car shall automatically stop at a floor landing within a tolerance of ½ inch (13 mm) under rated loading to zero loading conditions....
