Free-standing Toe guard VPL with stationary lower landing walls and gate shields the lift inside. As a self-contained unit, Toe Guard requires minimal construction and is ADA...
Search Results "Vertical Plane"
Commonly Searched Documents
- Harmar TG400 Toe Guard Commercial Platform Lift
- Harmar CPL800H-1400H Hydraulic CPL with Modular Tower
-
T502.2 Doorways with Lifts, Ramps or Bridgeplates
The vertical clearance at doorways with lifts, ramps or bridgeplates shall comply with T502.2....
-
4.1.6(1)(b)
(b) If power-driven vertical access equipment (e.g., escalator) is planned or installed where none existed previously, or if new stairs (other than stairs installed to meet emergency exit...
-
A4.1.3(5)
If a building is exempt from the elevator requirement, it is not necessary to provide a platform lift or other means of vertical access in lieu of an elevator....
-
Accessible Passenger Loading Zones [§503]
Accessible Passenger Loading Zones [§503] Requirements for accessible passenger loading zones address vehicle pull-up spaces and access aisles, including their dimensions, surfacing, and vertical...
-
609.3 Spacing
The space between the wall and the grab bar shall be 1½ inches (38 mm). The space between the grab bar and projecting objects below and at the ends shall be 1½ inches (38 mm)...
-
609.3 Spacing
The space between the wall and the grab bar shall be 1 1/2 inches (38 mm). The space between the grab bar and projecting objects below and at the ends shall be 1 1/2 inches (38 mm)...
-
609.3 Spacing
609.3 Spacing. The space between the wall and the grab bar shall be 1½ inches (38 mm). The space between the grab bar and projecting objects below and at the ends shall be 1½ inches...
-
9.2.2(2)
(2) An accessible route complying with 4.3 shall connect all accessible spaces and elements, including telephones, within the unit, sleeping room, or suite. This is not intended to...
-
609.3 Spacing
The space between the wall and the grab bar shall be 1 1/2 inches (38 mm). The space between the grab bar and projecting objects below and at the ends shall be 1 1/2 inches (38 mm)...
- Adaptive Engineering Inc. Mobilift CX Wheelchair Lift
-
Common Problems with Parking
Ø Parking garages do not have adequate vertical clearance for vans. Fully accessible parking, including a space reserved for those who use vans, is provided. ...
-
11B-609.3 Spacing
The space between the wall and the grab bar shall be 1½ inches (38 mm). The space between the grab bar and projecting objects below and at the ends shall be 1½ inches (38 mm)...
- Ascension Virtuoso Portable Wheelchair Lift Demonstration Video
-
410.1 General
Inclined stairway chairlifts and inclined and vertical platform lifts are available for short-distance vertical transportation....
-
11B-410.1 General
Inclined stairway chairlifts and inclined and vertical platform lifts are available for short-distance vertical transportation....
-
11B-410.1 General
Inclined stairway chairlifts and inclined and vertical platform lifts are available for short-distance vertical transportation....
-
11B-410.1 General
Inclined stairway chairlifts and inclined and vertical platform lifts are available for short-distance vertical transportation....
-
10.4.1(1)
(1) Elements such as ramps, elevators or other vertical circulation devices, ticketing areas, security checkpoints, or passenger waiting areas shall be placed to minimize the distance which...
-
11B-404.2.9 Door and gate opening force
Powered doors shall be controlled on both the interior and exterior sides of the doors by sensing devices, push plates, vertical actuation bars or other similar operating devices complying...
-
11B-404.2.9 Door and gate opening force
Powered doors shall be controlled on both the interior and exterior sides of the doors by sensing devices, push plates, vertical actuation bars or other similar operating devices complying...
-
11B-404.2.9 Door and gate opening force
Powered doors shall be controlled on both the interior and exterior sides of the doors by sensing devices, push plates, vertical actuation bars or other similar operating devices complying...
- Wikk Industries Inc. Bollard With Push Plate PART#BPRT126SMFT32D (630)