Additional language or an additional sign below the International Symbol of Accessibility shall state “Minimum Fine $250.”
Search Results "TTY Signage"
-
11B-502.6.2 Minimum fine
-
1009.9 Signage
Signage indicating special accessibility provisions shall be provided as shown: Each door providing access to an area of refuge from an adjacent floor area shall be identified by a...
-
1009.9 Signage
Signage indicating special accessibility provisions shall be provided as shown: Each door providing access to an area of refuge from an adjacent floor area shall be identified by a...
-
412.8 Legacy TTY Support
ICT equipment or systems with two-way voice communication that do not themselves provide TTY functionality shall conform to 412.8....
-
IV. Priority Seating Signs and Other Signage
Priority Seating Signs and Other Signage...
-
11B-703.1.1.2 Inspection
Signs and identification devices shall be field inspected after installation and approved by the enforcing agency prior to the issuance of a final certificate of occupancy per...
-
11B-703.1.1.2 Inspection
Signs and identification devices shall be field inspected after installation and approved by the enforcing agency prior to the issuance of a final certificate of occupancy per...
-
Height from Finish Floor or Ground: ADA Standard Section 703.5.6
Visual characters shall be 40 inches (1015 mm) minimum above the finish floor or ground. EXCEPTION: Visual characters indicating elevator car controls shall not be required to...
-
TTY Scoping [4.1.3(17)(c)]
TTY Scoping [4.1.3(17)(c)] ADAAG requires at least one TTY on site when there are four or more pay phones (and at least one is interior) and in specific buildings or locations when a...
-
A4.31.9 Text Telephones
A public text telephone may be an integrated text telephone pay phone unit or a conventional portable text telephone that is permanently affixed within, or adjacent to, the telephone...
-
Conducting TTY Calls
After TTY calls are recognized, call takers must effectively communicate with callers during the calls....
-
Shelf and Outlet
The shelf must provide a vertical clearance of at least 6 inches so that different types of portable TTY devices can be connected....
-
Installation Height and Location: ADA Standard Section 703.4
Signs with tactile characters shall comply with 703.4.
-
Stroke Thickness: ADA Standard Section 703.5.7
Stroke thickness of the uppercase letter “I” shall be 10 percent minimum and 30 percent maximum of the height of the character.
-
11B-703.4 Installation height and location
Signs with tactile characters shall comply with Section 11B-703.4.
-
11B-703.5.7 Stroke thickness
Stroke thickness of the uppercase letter “I” shall be 10 percent minimum and 20 percent maximum of the height of the character. [2010 ADA Standards] 703.5.7 Stroke Thickness....
-
11B-703.5.7 Stroke thickness
Stroke thickness of the uppercase letter “I” shall be 10 percent minimum and 20 percent maximum of the height of the character. [2010 ADA Standards] 703.5.7 Stroke Thickness....
-
11B-703.4 Installation height and location
Signs with tactile characters shall comply with Section 11B-703.4.
-
Signage
Signage: a....
-
TTY Use
Some foreign carriers opposed TTY requirements on the grounds that TTY access is technically infeasible in many countries....
-
Scoping for Text Telephones (Preamble, Section-by-Section Analysis)
- Scoping for TDD's or text telephones was increased. One TDD or text telephone, for speech and hearing impaired persons, must be provided at locations with 4, rather than 6, pay...
-
Innerface Clearview Interior Signage
Featuring ¼” acrylic and metal components available in a variety of colors, our Clearview modular interior system brings a modern look to modular interior signage....
-
Floor Requirement: ADA Standard Section 217.4.2
Section 217.4.2 covers scoping requirements in the current ADA Standards for TTYs on the floor of public and private buildings.
-
11B-217.4.2 Floor requirement
TTYs in public buildings shall be provided in accordance with Section 11B-217.4.2.1. TTYs in private buildings shall be provided in accordance with Section 11B-217.4.2.2....
