In new construction of buildings where elevators are required by Section 11B-206.2.3, and which exceed 10,000 square feet (929 m2) on any floor, an accessible means of vertical access via...
Search Results "Square Footage"
-
11B-206.2.3.2 Distance to Elevators
-
11B-1008.2.4.1 Ground level
Exceptions: In play areas less than 1000 square feet (93 m2), the clear width of accessible routes shall be permitted to be 44 inches (1118 mm) minimum, if at least one turning space...
-
11B-1008.2.4.1 Ground level
Exceptions: In play areas less than 1000 square feet (93 m2), the clear width of accessible routes shall be permitted to be 44 inches (1118 mm) minimum, if at least one turning space...
-
Ground Level: ADA Standard Section 1008.2.4.1
In play areas less than 1000 square feet (93 m2), the clear width of accessible routes shall be permitted to be 44 inches (1120 mm) minimum, if at least one turning space complying with...
-
703.7.2.3 Volume Control Telephones
Telephones with a volume control shall be identified by a pictogram of a telephone handset with radiating sound waves on a square field such as shown in Figure 703.7.2.3....
-
§ 36.304(d)(4)(i)
(i) Where an existing play area has less than 1000 square feet or is located in a family child care facility where the proprietor actually resides, it shall be exempt from the provisions...
-
11B-705.1.1.2 Dome spacing
center-to-center spacing of 2.3 inches (58 mm) minimum and 2.4 inches (61 mm) maximum, and a base-to-base spacing of 0.65 inch (16.5 mm) minimum, measured between the most adjacent domes on a square...
-
https://www.facebook.com/DashOneProDashCam/
The DashOne Pro Dash Cam works by continuously recording video footage while your vehicle is in operation....
-
AJW Architectural Products U1314 34 oz. Unidoor Square Soap Dispenser - Recessed
Product Features Fabricated of #18 gauge stainless steel with #4 satin finish A refill indicator displays remaining product Holds 56 fl oz. of liquid soap or hand...
-
Car Dimensions and Doors: ADA Standard Section 408.4.1
Section 408.4.1 covers the current ADA Standards for the car dimensions and doors of limited-use/limited-application elevators.
-
I. Required Survey Tools
The following tools will be required to allow you to accurately complete the ADA Checklist for New Lodging Facilities: A. 12' Stiff Metal Tape Measure B. 24" Long Builders' Level (Square...
-
11B-407.4.1 Car dimensions
existing buildings, where existing shaft configuration prohibits strict compliance with Section 11B-407.4.1, existing elevator car configurations that provide a clear floor area of 18 square...
-
11B-407.4.1 Car dimensions
existing buildings, where existing shaft configuration prohibits strict compliance with Section 11B-407.4.1, existing elevator car configurations that provide a clear floor area of 18 square...
-
Wheelchairs and Other Power-Driven Mobility Devices
The business’s volume of pedestrian traffic (which may vary at different times of the day, week, month, or year); The business’s design and operational characteristics, such as its square...
-
806 Transient Lodging Guest Rooms
The plans were provided to show that, with some redesign, the 2010 Standards do not normally increase the square footage of an accessible sleeping room or bathroom with mobility features...
-
11B-705.1.1.2 Dome spacing
center-to-center spacing of 2.3 inches (58 mm) minimum and 2.4 inches (61 mm) maximum, and a base-to-base spacing of 0.65 inch (16.5 mm) minimum, measured between the most adjacent domes on a square...
-
Accessible Routes to Press Boxes
An accessible route is not required to press boxes with 500 square feet or less of aggregate space that are located on bleachers with entrances on only one level (Exception 1)....
-
705.1.2 Dome Spacing
center-to-center spacing of 1.6 inches (41 mm) minimum and 2.4 inches (61 mm) maximum, and a base-to-base spacing of 0.65 inch (17 mm) minimum, measured between the most adjacent domes on a square...
-
705.1.2 Dome Spacing
center-to-center spacing of 1.6 inches (41 mm) minimum and 2.4 inches (61 mm) maximum, and a base-to-base spacing of 0.65 inch (17 mm) minimum, measured between the most adjacent domes on a square...
-
711.4.1 Through penetrations
6 inch (152 mm) nominal diameter shall not be limited to the penetration of a single fire-resistance-rated floor assembly provided that the area of the penetration does not exceed 144 square...
-
The Power of 504 by Disability Rights Education & Defense Fund (DREDF)
Includes contemporary news footage and news interviews with participants and demonstration leaders. Available in open caption, audio descriptive and standard formats....
-
11B-411.2.1.5.1 Size
Buttons shall have square shoulders, be 3/4 inch (19.1 mm) minimum in the smallest dimension and shall be raised 1/8 inch (3.2 mm) plus or minus 1/32 inch (0.8 mm) above the surrounding...
-
11B-411.2.1.5.1 Size
Buttons shall have square shoulders, be 3/4 inch (19.1 mm) minimum in the smallest dimension and shall be raised 1/8 inch (3.2 mm) plus or minus 1/32 inch (0.8 mm) above the surrounding...
-
11B-411.2.1.5.1 Size
Buttons shall have square shoulders, be 3/4 inch (19.1 mm) minimum in the smallest dimension and shall be raised 1/8 inch (3.2 mm) plus or minus 1/32 inch (0.8 mm) above the surrounding...
