610.3.1 Rectangular Seats....
Search Results "Mobility Aid Seating Location"
Commonly Searched Documents
-
610.3.1 Rectangular Seats
-
1. Providing Equal Access With Auxiliary Aids and Services
These different ways are provided through “auxiliary aids and services.” ...
-
Residential Facilities: ADA Standard Section 208.3.2
Section 208.3.2 covers scoping requirements in the current ADA Standards for the location of parking spaces in residential facilities.
-
§ 38.159 Mobility aid accessibility
[63 FR 51698, 51703, Sept. 28, 1998]
-
§ 38.125 Mobility aid accessibility
[56 FR 45756, Sept. 6, 1991, as amended at 58 FR 63103, Nov. 30, 1993; 76 FR 57939, Sept. 19, 2011]
-
610.3.1 Rectangular Seats
The rear edge of a rectangular seat shall be 2½ inches (64 mm) maximum and the front edge 15 inches (380 mm) minimum and 16 inches (405 mm) maximum from the seat wall....
-
Type: ADA Standard Section 802.3.2
Companion seats shall be equivalent in size, quality, comfort, and amenities to the seating in the immediate area. Companion seats shall be permitted to be movable....
-
11B-802.3.2 Type
Companion seats shall be equivalent in size, quality, comfort, and amenities to the seating in the immediate area. Companion seats shall be permitted to be movable....
-
F245.2 Picnic Units with Mobility Features
Picnic facilities shall provide picnic units with mobility features in accordance with F245.2. Advisory F245.2 Picnic Units with Mobility Features....
-
Seat [4.21.3]
Seat [4.21.3] ADAAG specifies maximum seat dimensions. Minimum dimensions contained in the CABO-ANSI A117.1‒1992 standard are acceptable....
-
Team and Player Seating
A provision for team and player seating areas is included in the final rule (221.2.1.4)....
-
610.3.1 Rectangular Seats
The rear edge of a rectangular seat shall be 2 1/2 inches (64 mm) maximum and the front edge 15 inches (380 mm) minimum and 16 inches (405 mm) maximum from the seat wall....
-
Transfer Height: ADA Standard Section 1002.5.2
The height of amusement ride seats designed for transfer shall be 14 inches (355 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
-
Structural Strength: ADA Standard Section 610.4
Section 610.4 covers the current ADA Standards for the structural strength of seats.
-
11B-610.4 Structural strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or...
-
Companion Seats
Companion Seats. Section 4.33.3 of the 1991 Standards required at least one fixed companion seat to be provided next to each wheelchair space....
-
1607A.9.2 Grab bars, shower seats and accessible benches
Grab bars, shower seats and accessible benches shall be designed to resist a single concentrated load of 250 pounds (1.11 kN) applied in any direction at any point on the grab bar, shower...
-
§ 382.43 Treatment of mobility aids and assistive devices
§ 382.43 Treatment of mobility aids and assistive devices....
-
Addendum F: Relative Height Differences
Relative Seat Height Difference for High and Low Transfers for Protocol B. ...
-
Companion Seats: ADA Standard Section 1002.4.7
Where the interior width of the amusement ride is greater than 53 inches (1345 mm), seating is provided for more than one rider, and the wheelchair is not required to be centered within...
-
"Other Power-Driven Mobility Device" and "Wheelchair" (Section-by-Section Analysis)
mobility device (EPAMD), such as the Segway® PT, as a mobility device....
-
9. Can public schools charge for the provision of auxiliary aids or services?
Public schools cannot charge for the auxiliary aids or services that they provide to meet the effective communications provision in the Title II regulations....
-
Amusement Ride Seats Designed for Transfer: ADA Standard Section 1002.5
Amusement ride seats designed for transfer shall comply with 1002.5 when positioned for loading and unloading. Advisory 1002.5 Amusement Ride Seats Designed for Transfer....
-
Companion Seats
In the final rule, the Board has clarified that companion seats are to be located to provide shoulder alignment with adjacent wheelchair spaces (802.3.1)....