Toilet compartment doors, including door hardware, shall comply with 404, except that if the approach is to the latch side of the compartment door, clearance between the door side of the...
Search Results "In-Swinging Door"
Filters
Commonly Searched Documents
-
604.8.2.2 Doors
-
604.8.2.2 Doors
604.8.2.2 Doors....
-
11B-404.1 General
Doors, doorways, and gates that are part of an accessible route shall comply with Section 11B-404....
-
4.13.7 Two Doors in Series
The minimum space between two hinged or pivoted doors in series shall be 48 in (1220 mm) plus the width of any door swinging into the space....
-
4.13.7 TWO DOORS IN SERIES
The minimum space between two hinged or pivoted doors in series shall be 48 in (1220 mm) plus the width of any door swinging into the space....
-
Exterior/ Fire Doors
Exterior/ Fire Doors A maximum opening force is not specified for exterior swing doors because the closing force required by building codes usually exceeds an "accessible" resistance....
-
Are screen doors or storm doors considered “doors in series”?
No, screen or storm doors are not considered “doors in series” since they are part of the same doorway opening as the entry door....
-
11B-604.8.1.1.2 Maneuvering space with side-opening door
In a wheelchair accessible compartment with a door located in the side wall or partition, either in-swinging or out-swinging, a minimum 60 inches (1524 mm) wide and 60 inches (1524 mm) deep...
-
Doors and Gates in Series [§404.2.6]
Doors and Gates in Series [§404.2.6] At hinged or pivoted doors or gates in series, a separation is required that is at least 48” plus the width of doors or gates swinging into the space...
-
AJW Architectural Products UG120-U Series UG120-U 29" Swing-Up, 1.25" Diameter Grab Bar - Configuration U
When properly mounted, swing-up type bar will sustain a static load of 250 lbs....
-
Doors in a Series
Section 404.2.6 specifies the minimum separation between doors and gates in series (48 inches plus the width of doors or gates swinging into the space)....
-
11B-604.8.2.2 Doors
11B-604.8.2.2 Doors....
-
11B-604.8.2.2 Doors
Toilet compartment doors, including door hardware, shall comply with Section 11B-404, except that if the approach is to the latch side of the compartment door, clearance between the door...
-
Automatic Doors
In the proposed rule, section 404.3.2 required that maneuvering clearances specified for swinging doors be provided at power-assisted doors and gates since their activation, unlike those...
-
11B-409.3 Elevator doors
Hoistway doors, car doors, and car gates shall comply with Sections 11B-409.3 and 11B-404....
-
11B-409.3 Elevator doors
Hoistway doors, car doors, and car gates shall comply with Sections 11B-409.3 and 11B-404....
-
11B-409.3 Elevator doors
Hoistway doors, car doors, and car gates shall comply with Sections 11B-409.3 and 11B-404....
-
Hager Companies Three Knuckle - Half Mortise Swing Clear Hinge AB7511
Three Knuckle - Half Mortise Swing Clear Hinge AB7511 - Concealed Anti-Friction Bearing - Heavy Weight Description: - For square edge doors - ANSI A8221 - Non-rising removable...
-
Hager Companies Three Knuckle - Half Mortise Swing Clear Hinge AB7512
Three Knuckle - Half Mortise Swing Clear Hinge AB7512 - Concealed Anti-Friction Bearing - Heavy Weight Description: - For beveled edge doors - ANSI A8221 - Non-rising...
-
Hager Companies Three Knuckle - Full Mortise Swing Clear Hinge AB7501
Three Knuckle - Full Mortise Swing Clear Hinge AB7501 - Concealed Anti-Friction Bearing - Heavy Weight Description: - For square edge doors - ANSI A8121 - Non-rising removable...
-
Hager Companies Five Knuckle - Full Mortise Swing Clear Hinge BB1362
Five Knuckle - Full Mortise Swing Clear Hinge BB1362 - Ball Bearing - Heavy Weight Description: - ANSI A5121 - For square edge doors - Non-rising removable pin with button...
-
Hager Companies Five Knuckle - Half Mortise Swing Clear Hinge BB1265
Five Knuckle - Half Mortise Swing Clear Hinge BB1265 - Ball Bearing - Heavy Weight Description: - ANSI A8221 - For beveled edge doors - Non-rising removable pin with...
-
Hager Companies Five Knuckle - Full Mortise Swing Clear Hinge BB1363
Five Knuckle - Full Mortise Swing Clear Hinge BB1363 - Ball Bearing - Heavy Weight Description: - ANSI A5121 - For beveled edge doors - Non-rising removable pin with...
-
Hager Companies Five Knuckle - Full Mortise Swing Clear Hinge BB1361
Five Knuckle - Full Mortise Swing Clear Hinge BB1361 - Ball Bearing - Standard Weight Description: - ANSI A5122 - For beveled edge doors - Non-rising removable pin with...
