Openings in trail tread surfaces, trail resting spaces, and trail passing spaces shall be small enough to prevent passage of a 1/2 inch- (13 mm-) diameter sphere....
Search Results "Highway Rest Area"
-
7.4.7 Openings
-
1018.3 Surface
The surface of beach access routes and resting intervals shall be firm and stable....
-
1018.3 Surface
The surface of beach access routes and resting intervals shall be firm and stable....
-
1018.3 Surface
This section requires the surface of beach access routes and resting intervals to be firm and stable....
-
11B-1002.3 Load and unload areas
A turning space complying with Sections 11B-304.2 and 11B-304.3 shall be provided in load and unload areas....
-
11B-1002.3 Load and unload areas
A turning space complying with Sections 11B-304.2 and 11B-304.3 shall be provided in load and unload areas....
-
36 CFR Part 1190, Proposed Accessibility Guidelines for Pedestrian Facilities in the Public Right-of-Way; Shared Use Paths (SNPRM)
Shared use paths are physically separated from motor vehicle traffic by an open space or barrier, and are either within the highway right-of-way or within an independent right-of-way....
-
Openings [1016.6]
Openings in the surface of ORARs, passing spaces, and resting intervals must be small enough so that a sphere more than one-half inch in diameter cannot pass through....
-
1017.5 Tread Obstacles
Tread obstacles on trails, passing spaces, and resting intervals shall not exceed 1/2 inch (13 mm) in height measured vertically to the highest point....
-
1017.5 Tread Obstacles
Tread obstacles on trails, passing spaces, and resting intervals shall not exceed 1/2 inch (13 mm) in height measured vertically to the highest point....
-
Assembly Areas [4.33]
Assembly Areas [4.33] ADAAG requirements for assembly areas apply to areas where groups of people gather for recreational, educational, political, social, or amusement purposes or for...
-
11B-810.2.2 Dimensions
Bus stop boarding and alighting areas shall provide a clear length of 96 inches (2438 mm) minimum, measured perpendicular to the curb or vehicle roadway edge, and a clear width of 60 inches...
-
11B-810.2.2 Dimensions
Bus stop boarding and alighting areas shall provide a clear length of 96 inches (2438 mm) minimum, measured perpendicular to the curb or vehicle roadway edge, and a clear width of 60 inches...
-
Figure 810.2.2 Dimensions of Bus Boarding and Alighting Areas – Drawing from the U.S. Access Board
-
221 Assembly Areas
Section 221.1 contains a general charging statement that assembly areas provide wheelchair spaces, companion seats, and designated aisle seats....
-
1016.4 Passing Spaces
Passing spaces and resting intervals are permitted to overlap....
-
1016.8.4 Turning Space
Where resting intervals are provided adjacent to an outdoor recreation access route, a turning space complying with 304.3.2 shall be provided. ...
-
1016.8.4 Turning Space
Where resting intervals are provided adjacent to an outdoor recreation access route, a turning space complying with 304.3.2 shall be provided....
-
1008 Play Areas
1008 Play Areas...
-
240 Play Areas
240 Play Areas...
-
1008 Play Areas
The play area specifications address accessible routes, ground level and elevated play components, play structures, and ground surfaces....
-
11B-246.1 General
Outdoor developed areas shall comply with Section 11B-246....
-
11B-246.1 General
Outdoor developed areas shall comply with Section 11B-246....
-
Elevator requirement to new dining area on the mezzanine of an existing facility
Let's also assume that the seating area of the mezzanine dining area you mention contains more than 25% of the total combined seating area and focus on the more difficult question you seem...
