The top of bathtub seats shall be 17 inches (432 mm) minimum and 19 inches (483 mm) maximum above the bathroom finish floor....
Search Results "Companion Seat"
Filters
Commonly Searched Documents
-
11B-610.2 Bathtub seats
-
610 Seats
610 Seats...
-
§ 35.138(i) Purchasing multiple tickets
(i) Purchasing multiple tickets.
-
§ 35.138(d) Purchasing multiple tickets
(d) Purchasing multiple tickets.
-
610 Seats
Requirements for bathtub and shower seats are provided in section 610. Comment. Specifications are provided for rectangular and L-shaped shower seats (610.3)....
-
11B-610 Seats
11B-610 Seats....
-
1607.9.2 Grab bars, shower seats and accessible benches
Grab bars, shower seats and accessible benches shall be designed to resist a single concentrated load of 250 pounds (1.11 kN) applied in any direction at any point on the grab bar, shower...
-
Entry Points and Seats: ADA Standard Section 1008.4.4
Where play components require transfer to entry points or seats, the entry points or seats shall be 11 inches (280 mm) minimum and 24 inches (610 mm) maximum from the clear floor or ground...
-
610.3.1 Rectangular Seats
610.3.1 Rectangular Seats....
-
Shower/Tub Seat Mounting Location
I encountered this shower/tub seat in a hotel bathroom....
-
610.3.1 Rectangular Seats
The rear edge of a rectangular seat shall be 2½ inches (64 mm) maximum and the front edge 15 inches (380 mm) minimum and 16 inches (405 mm) maximum from the seat wall....
-
Seat [4.21.3]
Seat [4.21.3] ADAAG specifies maximum seat dimensions. Minimum dimensions contained in the CABO-ANSI A117.1‒1992 standard are acceptable....
-
Section 36.406(f) Assembly Areas (Section-by-Section Analysis)
Proposed § 36.406(f)(1) requires wheelchair and companion seating locations to be dispersed so that some seating is available on each level served by an accessible route. ...
-
Team and Player Seating
A provision for team and player seating areas is included in the final rule (221.2.1.4)....
-
610.3.1 Rectangular Seats
The rear edge of a rectangular seat shall be 2 1/2 inches (64 mm) maximum and the front edge 15 inches (380 mm) minimum and 16 inches (405 mm) maximum from the seat wall....
-
Transfer Height: ADA Standard Section 1002.5.2
The height of amusement ride seats designed for transfer shall be 14 inches (355 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
-
Structural Strength: ADA Standard Section 610.4
Section 610.4 covers the current ADA Standards for the structural strength of seats.
-
11B-610.4 Structural strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or...
-
1607A.9.2 Grab bars, shower seats and accessible benches
Grab bars, shower seats and accessible benches shall be designed to resist a single concentrated load of 250 pounds (1.11 kN) applied in any direction at any point on the grab bar, shower...
-
4.21.3 SEAT
A seat shall be provided in shower stalls 36 in by 36 in (915 mm by 915 mm) and shall be as shown in Fig. 36....
-
11B-221.6 Semi-ambulant seats
In addition, assembly areas shall ensure that — (1) In stadiums, arenas, and grandstands, wheelchair spaces and companion seats are dispersed to all levels that include seating...
-
11B-221.6 Semi-ambulant seats
In addition, assembly areas shall ensure that — (1) In stadiums, arenas, and grandstands, wheelchair spaces and companion seats are dispersed to all levels that include seating...
-
11B-221.6 Semi-ambulant seats
In addition, assembly areas shall ensure that — 1) In stadiums, arenas, and grandstands, wheelchair spaces and companion seats are dispersed to all levels that include seating served...
-
4.21.3 Seat
A seat shall be provided in shower stalls 36 in by 36 in (915 mm by 915 mm) and shall be as shown in Fig. 36....