In transfer type shower compartments, thresholds ½ inch (13 mm) high maximum shall be beveled, rounded, or vertical....
Search Results "Beveled"
-
608.7 Thresholds
-
11B-608.7 Thresholds
In transfer type shower compartments, thresholds ½ inch (12.7 mm) high maximum shall be beveled, rounded, or vertical....
-
EXHIBIT A Required Accessible Elements at QuikTrip Stores
at least 60 inches by 60 inches when the ramp changes direction; with no level changes in excess of ½ inch vertically and no level changes greater than ¼ inch vertically unless they are beveled...
-
608.7 Thresholds
In transfer type shower compartments, thresholds 1/2 inch (13 mm) high maximum shall be beveled, rounded, or vertical....
-
§ 38.159(b)(8) Platform entrance ramp
Thresholds between 1/4 inch (6.5 mm) and 1/2 inch (13 mm) high shall be beveled with a slope no greater than 1:2....
-
1010.1.6 Thresholds
Raised thresholds and floor level changes greater than ¼ inch (6.4 mm) at doorways shall be beveled with a slope not greater than one unit vertical in two units horizontal (50-percent slope...
-
1010.1.6 Thresholds
Raised thresholds and floor level changes greater than ¼ inch (6.4 mm) at doorways shall be beveled with a slope not greater than one unit vertical in two units horizontal (50-percent slope...
-
4(2)
(2) In single-story dwelling units, changes in level within the dwelling unit with heights between 1/4 inch and 1/2 inch are beveled with a slope no greater than 1:2....
-
Observations:
The wheelchair scale we used had a leveled surface of length 30 in. long with a bevel of 5 in. each at both ends (i.e., total length of 40 in.)....
-
References
Changes in level of ¼ inch (6.4 mm) high maximum shall be permitted to be vertical. 303.3 Beveled....
-
G2
Yes No Note: level changes between 1/4 inch and 1/2 inch should be beveled)....
-
Platform Size and Surface
In addition, changes in level between ¼ to ½ inch must be beveled with a slope 1:2 maximum; changes in level more than ½ inch must be treated as a ramp....
-
Carpet [§302.2]
Trim must meet specifications for changes in level, including requirements for beveled edges when the height exceeds ¼ inch. The maximum height is ½ inch....
-
11B-608.7 Thresholds
In transfer type shower compartments, thresholds ½ inch (13 mm) high maximum shall be beveled, rounded, or vertical. Exception: Reserved....
-
11B-608.7 Thresholds
In transfer type shower compartments, thresholds ½ inch (13 mm) high maximum shall be beveled, rounded, or vertical. Exception: Reserved....
-
Changes in Level at Entry to Wheelchair Spaces (M303.3)
Level changes between ¼ inch high and ½ inch high would be required to be beveled with a slope not steeper than 1:2....
-
Hager Companies Door Protection Plate 204S
Door Protection Plate 204S 0.125" gauge with 4-sided bevel Material: - Clear Plastic...
-
Hager Companies Door Protection Plate 194S
Door Protection Plate 194S 0.050" gauge with 4-sided bevel Materials: - Aluminum, Brass, Bronze, Stainless Steel...
-
Hager Companies Door Protection Plate 193S
Door Protection Plate 193S 0.050" gauge with 3-sided bevel Materials: - Aluminum, Brass, Bronze, Stainless Steel...
-
5.8.1.2 Entry to Wheelchair Spaces on Raised Platforms
Entry to Wheelchair Spaces on Raised Platforms Recommendations Description: Entry to wheelchair spaces on raised surfaces greater than ¼ inch in height requires a transition via a bevel...
-
Power Wheelchairs
The weight and bulk of a power wheelchair severely limits the size of obstacles-usually less than 50 mm (2 inches) in height-that can be negotiated without a ramp or bevel....
-
Detectable Warning Systems, Inc. AlertTile® Detectable Warning
resistance, slip resistance, wear resistance and long-term durability for retrofit applications. alerttile®'s exclusive design incorporates a thin, slightly flexible profile with a perimeter beveled...
-
Hager Companies 4.5" Round Actuator 2-659-0166
ADA Actuators – 4.5" Round ISA Logo Only Features: - Hard wired and wireless (hard wired standard) - Beveled edges - Graphics embossed onto the faceplate for durability - 304 grade...
-
SATECH, Inc. SmartCells Classic Ant-Fatigue Mat
shapes & sizes, and modular runners grease resistant static-safe drain-through anti-slip additional colors Size: 2′x3′ and 3′x5′ and 24″ x 68″ Thickness: .5″ with beveled...
