FIGURE 11B-5D -- SIDE REACH ETA Editor's Note Select portions of the 2010 California Building Code (2010 CBC) are provided for reference only....
Search Results "Vertical Reference Plane"
-
1125B.3
-
Technical Memorandum TM 2014-24 Location (Accessible Routes)
TM 2014-24 Location (Accessible Routes) Effective Date: August 15, 2014 2012 TAS Reference: 206.3 In accordance with TAS 206.3, the location of accessible routes must coincide...
-
Technical Memorandum TM 2013-12 Number of Accessible Elements and Spaces
TM 2013-12 Number of Accessible Elements and Spaces Effective Date: June 1, 2013 2012 TAS Reference: 201.1 In accordance with TAS 201.1, the standards must be applied to...
-
§35.130(b)(3) (Section-by-Section Analysis)
The phrase "criteria or methods of administration" refers to official written policies of the public entity and to the actual practices of the public entity....
-
407.3.2 Alphabetic Keys (Section-by-Section Analysis)
alphabetic overlay is provided (such as on a telephone keypad), the relationships between letters and digits would be required to conform to ITU-T Recommendation E.161, as incorporated by reference...
-
Website Accessibility Coordinator
Responsible for ensuring that the Accessibility Best Practices Guidance discussed in Paragraph 27 includes guidance on the accessibility requirements of Title III of the ADA and WCAG 2.0 AA, and reference...
-
Is compliance required for parking spaces designed specifically for recreational vehicles such as motor homes and camping or boating trailers?
They can be consulted as a reference in addressing access to RV parking on non-federal sites, including those subject to the ADA. ...
-
M201.1 Enforcing Authority
Other agencies, referred to as an enforcing authority in the standards (see defined terms in M102.1), may adopt the standards as mandatory requirements for entities subject to their jurisdiction...
-
Changes in Level and Horizontal Gaps
Also, requiring the 8 inch height would reduce the vertical travel distance for a lift....
-
Q2.) What are the types of “field conditions” that were anticipated where the advisory says “tolerances recognized by this provision include those for field conditions”?
For example, a skilled brick mason cannot lay a perfectly vertical and straight wall. A skilled tile layer cannot create a perfectly flat wall behind a toilet room grab bar. ...
-
Ground-Level Accessible Routes
The 80-inch vertical clearance applies to ground-level routes only, and not elevated routes. This allows features like protective roofs and sun shelters to be present....
-
R218 Doors, Doorways, and Gates
Where there is a documented history of unauthorized entry by motor vehicles despite the use of alternative methods to control such entry, the need for bollards or other vertical barriers...
-
Gangway Slope and Rise Exceptions
For example, if the vertical distance between where the gangway departs the landside connection and the elevation of the pier surface at the lowest water level is 10 feet, the gangway would...
-
1. Typical Issues for Individuals Who Use Wheelchairs, Scooters, or Other Mobility Devices
Ramps with a vertical rise of more than 6 inches must have handrails on both sides....
-
Part 1. Typical Issues for Voters Who Use Wheelchairs, Scooters, or Other Mobility Devices
Ramps with a vertical rise of more than 6 inches must have handrails on both sides....
-
Slope and Rise [4.8.2]
Slope represents the proportion of vertical rise to horizontal length and can be represented as a ratio (as in ADAAG), percentage, pitch or in degrees....
-
Phase II – Textures
color patterns was divided further into different variations of each pattern (Spots - large bold spots, small random spots, and small evenly spaced spots; Stripes - horizontal stripes, vertical...
-
206.2.8 Employee Work Areas
However, passenger elevators used for vertical transportation between stories are not considered "work area equipment" as defined in 106.5....
-
206.2.8 Employee Work Areas
However, passenger elevators used for vertical transportation between stories are not considered "work area equipment" as defined in Section 106.5....
-
5.3.1 Permitted Obstructions to Transfer Sides for M301 and M302
Obstructions shall not be vertically less than 1 inch nor be horizontally more than 3 inches from the edge of the patient support surface to provide unobstructed access to the transfer surface...
-
1. Question: What is the minimum width needed for a non-level boarding railroad passenger station platform to meet the accessibility requirements of the Americans with Disabilities Act (ADA)?
For a non-level boarding island passenger platform with vertical pedestrian access (by elevator, stairs, escalator, etc.), the minimum width should be the width of the vertical access feature...
-
1134A.6 Showers
When a threshold is used, it shall be a maximum of 2 inches (50.8 mm) in height and have a beveled or sloped angle not exceeding 1 unit vertical in 2 units horizontal (26.6 degrees from...
-
105.2.2 ASME
Lifts are classified as: vertical platform lifts, inclined platform lifts, inclined stairway chairlifts, private residence vertical platform lifts, private residence inclined platform lifts...
-
105.2.2 ASME
Lifts are classified as: vertical platform lifts, inclined platform lifts, inclined stairway chairlifts, private residence vertical platform lifts, private residence inclined platform lifts...