Search Results "Parking Space Width"
Filters
Commonly Searched Documents
-
604.3.1 Water Closet Clear Floor Space
-
224.1.2 Guest Room Doors and Doorways
Because of the social interaction that often occurs in lodging facilities, an accessible clear opening width is required for doors and doorways to and within all guest rooms, including those...
-
603.2.3 Door Swing
Doors shall not swing into the clear floor space or clearance required for any fixture. Doors shall be permitted to swing into the required turning space. EXCEPTIONS: 1....
-
11B-233.3.1.2.6.5 Additional requirements.
Interior door opening width complying with Section 11B-404.3.1. 3. Door and gate hardware complying with Section 11B-404.2.7. 4....
-
Turning Space: ADA Standard Section 1010.1
A circular turning space 60 inches (1525 mm) diameter minimum with slopes not steeper than 1:48 shall be provided at shooting facilities with firing positions....
-
11B-304 TURNING SPACE
[See subsections ...]
-
11B-304 Turning space.
[See subsections ...]
-
11B-304 Turning space
[See subsections ...]
-
503.2 Vehicle Pull-Up Space
Passenger loading zones shall provide a vehicular pull-up space 96 inches (2440 mm) wide minimum and 20 feet (6100 mm) long minimum....
-
Building Entrance
At least one door at the accessible entrance must have a minimum clear width of 32 inches for a voter who uses a wheelchair or other mobility device to pass through the doorway....
-
Beds: ADA Standard Section 807.2.3
Where beds are provided, clear floor space complying with 305 shall be provided on at least one side of the bed....
-
Pilot Rock Smoker's Cease Fire Ash Receptacle
The Smoker's Cease Fire Ash Receptacle is high density polyethylene with UV protection. The easy open/close lid interlocks with the base. Covered opening restricts weather and...
-
503.2 Vehicle Pull-Up Space
Passenger loading zones shall provide a vehicular pull-up space 96 inches (2440 mm) wide minimum and 20 feet (6100 mm) long minimum. [ECTCR UFAS 4.6.5]...
-
General: ADA Standard Section 226.1
Section 226.1 of the ADA Standards covers information in the current ADA Standards on scoping requirements for dining surfaces and work surfaces.
-
11B-807.2.3 Beds
Where beds are provided, clear floor space complying with Section 11B-305 shall be provided on at least one side of the bed....
-
Turnstiles and Security Gates at Entrances
Turnstiles and Security Gates at Entrances Businesses with narrow revolving turnstiles located at the entrance exclude people with disabilities unless accessible gates or passages...
-
T502.3 Doorways with Level Boarding
Doorways on non-rail vehicles designed for level boarding bus systems shall comply with T502.3.
-
G. Drop-off Area
G. If the lodging facility has covered passenger pickup/drop-off areas, does the pavement at such area(s), including the required 5' wide access aisle, slope 1:50 or less (critical...
-
§ 36.304(b)(9)
(9) Installing offset hinges to widen doorways;
-
Sec.36.304(b)(9)
(9) Installing offset hinges to widen doorways;
-
9.2.2(3)
(3) Doors and doorways designed to allow passage into and within all sleeping rooms, suites or other covered units shall comply with 4.13.
-
9.4 Other Sleeping Rooms and Suites
Doors and doorways designed to allow passage into and within all sleeping units or other covered units shall comply with 4.13.5.
-
807.2.1 Turning Space
Turning space complying with 304 shall be provided within the cell....
-
807.2.1 Turning Space
Turning space complying with 304 shall be provided within the cell....
