If an accessible route has less than 60 in (1525 mm) clear width, then passing spaces at least 60 in by 60 in (1525 mm by 1525 mm) shall be located at reasonable intervals not to exceed...
Search Results "Access Aisle Width"
-
4.3.4 Passing Space
-
4.3.4 PASSING SPACE
If an accessible route has less than 60 in (1525 mm) clear width, then passing spaces at least 60 in by 60 in (1525 mm by 1525 mm) shall be located at reasonable intervals not to exceed...
-
Ramp Requirements [§405]
Ramp Requirements [§405]
-
i. Barriers to Web accessibility
Many of these individuals use assistive technology to enable them to navigate websites or access information contained on those sites....
-
Web Accessibility 101: Screen Reader Language Support
Thomas Logan, Senior Accessibility Consultant with SSB BART Group, demonstrates screen reader language support in JAWS and the importance of proper page markup for this feature to function...
-
Are accessible passenger loading zones required to be labeled by the International Symbol of Accessibility?
No, accessible passenger loading zones are not required to be identified by the International Symbol of Accessibility....
-
Location of accessible routes to stages. (Section-by-Section Analysis)
Location of accessible routes to stages....
-
Location of accessible routes to stages. (Section-by-Section Analysis)
Location of accessible routes to stages....
-
A4. Vertical Clearance
For van-accessible spaces, is there vertical clearance of at least 98 inches (8 feet - 2 inches) for the vehicle route to the parking space, the parking space, the access aisle and along...
-
B. 2004 ADA and ABA Accessibility Guidelines
On July 23, 2004, the Access Board published updated minimum accessibility guidelines for both the ADA and the ABA known as the Americans with Disabilities Act and Architectural Barriers...
-
209.5 Mechanical Access Parking Garages
209.5 Mechanical Access Parking Garages....
-
VI. CERTIFYING STATE ACCESSIBILITY CODES
Covered entities must comply with the Department's ADA regulations, including the ADA Standards for Accessible Design....
-
Raised Boxing or Wrestling Rings: ADA Standard Section 203.13
Section 203.13 covers scoping requirements of general exceptions for raised boxing or wrestling rings in the most current ADA Standards.
-
11B-703.7.1 Finish and contrast
Symbols of accessibility and their background shall have a non-glare finish....
-
11B-703.7.1 Finish and contrast
Symbols of accessibility and their background shall have a non-glare finish....
-
Finish and Contrast: ADA Standard Section 703.7.1
Symbols of accessibility and their background shall have a non-glare finish....
-
Approach: ADA Standard Section 604.8.1.3
Section 604.8.1.3 covers the current ADA Standards for the arrangement of toilet compartments to provide for left or right-handed approach to the water closet.
-
11B-703.7.2.2 International Symbol of TTY
The International Symbol of TTY shall comply with Figure 11B-703.7.2.2.
-
Grab Bars: ADA Standard Section 604.8.2.3
Section 604.8.2.3 covers the current ADA Standards for grab bars in ambulatory accessible compartments.
-
International Symbol of TTY: ADA Standard Section 703.7.2.2
The International Symbol of TTY shall comply with Figure 703.7.2.2.
-
11B-604.8.2.3 Grab bars
Grab bars shall comply with Section 11B-609. A side-wall grab bar complying with Section 11B-604.5.1 shall be provided on both sides of the compartment.
-
11B-703.7.2.3 Volume control telephones
Telephones with a volume control shall be identified by a pictogram of a telephone handset with radiating sound waves on a square field such as shown in Figure 11B-703.7.2.3.
-
1009.4.1 Standby power
The elevator shall meet the emergency operation and signaling device requirements of California Code of Regulations, Title 8, Division 1, Chapter 4, Subchapter 6, Elevator Safety...
-
11B-604.8.2.3 Grab bars
Grab bars shall comply with Section 11B-609. A side-wall grab bar complying with Section 11B-604.5.1 shall be provided on both sides of the compartment.
