that a clear floor space of 18 inches (455 mm) minimum by 18 inches (455 mm) minimum, centered on the tactile characters, is provided beyond the arc of any door swing between the closed position...
Search Results "Transfer Position"
-
703.4.2 Location
-
703.4.2 Location
that a clear floor space of 18 inches (455 mm) minimum by 18 inches (455 mm) minimum, centered on the tactile characters, is provided beyond the arc of any door swing between the closed position...
-
Signage
., rides with wheelchair spaces or transfer rides)....
-
12162(e)(2)(A)(iii) Designation of key stations
consultation with individuals with disabilities and organizations representing such individuals, taking into consideration such factors as high ridership and whether such station serves as a transfer...
-
609 Grab Bars
Specifications address size, spacing, position, surfaces, fittings, and structural strength....
-
404.3.1 Clear Width
The minimum clear width for automatic door systems in a doorway shall be based on the clear opening provided by all leaves in the open position. [ECTCR UFAS 4.13.5]...
-
1009.2.4 Seat Height
lift seat shall be designed to allow a stop at 16 inches (405 mm) minimum to 19 inches (485 mm) maximum measured from the deck to the top of the seat surface when in the raised (load) position...
-
G.6.vi. - May an agency shift the responsibility for making undue burden determinations to vendors (i.e., by requiring interested sources who offer EIT that meets the applicable technical provisions to explain why the purchase of such EIT would not impose an undue burden?
Only the agency is in a position to determine the difficulty or expense acquisition of EIT that meets the applicable technical provisions would impose on an agency and to know the resources...
-
7(2)(b)(ii)
(ii) Where the door swings out, a clear space is provided within the bathroom for a person using a wheelchair or other mobility aid to position the wheelchair such that the person is allowed...
-
11B-804.6.2 Operable parts
Bottom-hinged appliance doors, when in the open position, shall not be required to comply with Section 11B-309.3....
-
11B-703.8.9 Height above floor
Low resolution VMS characters shall be 40 inches (1016 mm) minimum above the floor of the viewing position, measured to the baseline of the character....
-
404.3.1 Clear Width
The minimum clear width for automatic door systems in a doorway shall be based on the clear opening provided by all leaves in the open position....
- Cybex Total Access Chest Press Exercise Machine
-
INSTRUCTIONS FOR INVESTIGATORS
did the Respondent have any vacant positions? [see Question 27] did the Respondent notify the Charging Party about possible vacant positions?...
-
§ 38.125(b)(4) Power or equipment failure
Platforms stowed in a vertical position, and deployed platforms when occupied, shall have provisions to prevent their deploying, falling, or folding any faster than 12 inches/second or their...
-
§ 38.95(b)(4) Power or equipment failure
Platforms stowed in a vertical position, and deployed platforms when occupied, shall have provisions to prevent their deploying, falling, or folding any faster than 12 inches/second or their...
-
§ 38.23(b)(4) Power or equipment failure
Platforms stowed in a vertical position, and deployed platforms when occupied, shall have provisions to prevent their deploying, falling, or folding any faster than 12 inches/second or their...
-
4.5 Other Tips for Making Equipment More Useable
It is important to be knowledgeable about your balance in a seated and standing position in order to make a safe activity choice....
-
2.4.2 Considerations of Manufacturers in Accessible MDE Design
Avoiding dangerous tipping is particularly important as patients transfer onto or off of MDE or reposition themselves upon it....
- Bobrick Swing-Up Grab Bar B-4998
- Irwin Seating Company ADA Swing-Away Aisle Panels
-
11B-804.6.2 Operable parts
Bottom-hinged appliance doors, when in the open position, shall not be required to comply with Section 11B-309.3....
-
11B-902.4.1 Clear floor or ground space
A clear floor space complying with Section 11B-305 positioned for forward approach shall be provided....
-
711.3.1.2 Through-penetration firestop system
Through penetrations shall be protected by an approved penetration firestop system installed as tested in accordance with ASTM E 814, with a minimum positive pressure differential of 0.01...