Big John Toilet Support - Valuable Safety & Installation Information anyone with a wall hung toilet should view....
Search Results "Control End Wall"
-
Big John Toilet Support & Short Swivel Support informational video
-
11B-809.10.7.2 Location
The centerline of the water closet shall be 17 inches (432 mm) minimum to 18 inches (457 mm) maximum from a wall or partition that is 54 inches (1372 mm) minimum in length....
-
11B-411.2.1.1 Location
Hall call consoles shall be wall-mounted. On floors with a building entry, including parking and transfer levels, each hoistway entrance shall be adjacent to a hall call console....
-
11B-411.2.1.1 Location
Hall call consoles shall be wall-mounted. On floors with a building entry, including parking and transfer levels, each hoistway entrance shall be adjacent to a hall call console....
-
11B-809.10.7.2 Location
The centerline of the water closet shall be 17 inches (432 mm) minimum to 18 inches (457 mm) maximum from a wall or partition that is 54 inches (1372 mm) minimum in length....
-
Plan 6B: 12-Foot Wide Accessible Guest Room
Features include a transfer shower, water closet length (rim to rear wall) 24 inches maximum, comparable vanity, wardrobe, and door connecting to adjacent guest room....
-
Standard Stall
Except for end-of-row stalls, doors must swing out due to the confined space within stalls (less clearance is required on the push side of doors)....
-
1115B.8.4
Toilet tissue dispensers shall be located on the wall within 12 inches (305 mm) of the front edge of the toilet seat, mounted below the grab bar, at a minimum height of 19 inches (485 mm...
-
§ 37.47(b)(4)
(4) End stations, unless an end station is close to another accessible station; and...
-
§ 37.51(b)(4)
(4) End stations, unless an end station is close to another accessible station; and...
-
Clear Floor Space [4.20.2]
ADAAG allows a lavatory on the same plumbing wall to overlap the clear floor space at the tub because knee and toe clearance is available below an accessible lavatory....
-
Grab Bars
Grab bars and any wall or other surfaces adjacent to grab bars must have rounded edges and are not allowed to have sharp or abrasive surfaces....
-
Inpro Corporation JointMaster® 103 VCT Expansion Joint Systems Floor to Wall
Requires the Premium User plan or above. (Login or upgrade your account!) -
Inpro Corporation JointMaster® 101 Floor Expansion Joint Covers Floor to Wall
Requires the Premium User plan or above. (Login or upgrade your account!) -
Excel Dryer, Inc. XLERATOReco® Hand Dryer Wall Guard BIM File
Requires the Premium User plan or above. (Login or upgrade your account!) -
Haws Barrier-free Chilled Dual Wall Mount Fountain H1117.8 p.1
Requires the Premium User plan or above. (Login or upgrade your account!) -
Haws Barrier-free Chilled Dual Wall Mount Fountain H1117.8 p.2
Requires the Premium User plan or above. (Login or upgrade your account!) -
Notes
The Editorial Committee settled on using the common adjectives “severe” or “extreme” that are employed in many contexts to identify values at the high end of a continuum of values....
-
American Specialties Double Robe Hook 7345
4" (100 mm) wide stainless steel bar forms hook at each end. Unit extends 1 5/8" (40 mm) from wall....
-
Alternate Roll-In Type Shower Compartments: ADA Standard Section 608.2.3
Section 608.2.3 covers the current ADA Standards for the size and clearances of alternate roll-in type shower compartments.
-
11B-608.2.3 Alternate roll-in type shower compartments
A 36 inch (914 mm) wide minimum entry shall be provided at one end of the long side of the compartment....
-
11B-608.2.3 Alternate roll-in type shower compartments
A 36 inch (914 mm) wide minimum entry shall be provided at one end of the long side of the compartment....
-
Boost Your Business - Chapter 12 - Elevators
Boost Your Business - Chapter 12 - Elevators
-
11B-812.9 Surface marking
The centerline of the text shall be a maximum of 6 inches (152 mm) from the centerline of the vehicle space and its lower corner at, or lower side aligned with, the end of the vehicle space...
