The Cantrells and MSHA have reached their own agreement regarding the payment of compensatory damages, and they have agreed to keep that amount confidential as part of the consideration...
Search Results "AHJ: Authority Having Jurisdiction"
-
H. Compensatory Relief for Complainants and Release
-
Transition Plates
Gangways are not required to have landings at the end, if transition plates are provided....
-
Transition Plates
Gangways are not required to have landings at the end, if transition plates are provided....
-
Location of overhead signage (slide 15)
We can have this wonderful overhead signage, but we also need to have the signage closer to the eye level. The bring it closer and easier-to-read concept....
-
ASSEMBLY AREA
Such areas as conference rooms would have to be accessible in accordance with other parts of this standard but would not have to meet all of the criteria associated with assembly areas....
-
11B-611.4 Height
Top loading machines shall have the door to the laundry compartment located 36 inches (914 mm) maximum above the finish floor....
-
FAIRNESS OF SETTLEMENT
FAIRNESS OF SETTLEMENT The Class Representatives and Class Counsel have concluded that the terms and conditions of the proposed Settlement Agreement are fair, reasonable, adequate, and...
-
Avoid the extremes of surface reflectivity and contrast (slides 11 and 13)
We don’t have to have highly reflective surfaces that will still reflect light but spread it, diffuse that light instead of pinpoint reflections....
-
PREFACE
All proposed alternative methods or physical changes should be checked against appropriate codes and enforcing authorities should be consulted to ensure that all proper steps are taken and...
-
28 CFR Part 36 Nondiscrimination on the Basis of Disability by Public Accommodations and in Commercial Facilities NPRM (2008 Title III NPRM)
with the minimum guidelines and requirements issued by the Architectural and Transportation Barriers Compliance Board" (Access Board); and perform periodic reviews of any rule judged to have...
-
C103 Defined Terms (Section-by-Section Analysis)
Some of the definitions have been carried over in whole or in part from the existing 255 Guidelines, while others represent terms that are new to these guidelines....
-
National Shelter System
New users to the site must self-register to access the system, however, this author made two attempts to register and received no promised confirming email that was to include instructions...
-
201.1 Scope
The standards for determining the appropriate or minimum numbers contained in this document are considered minimal and the Executive Director shall have the authority to make adjustments...
-
Undue burden (Preamble, Section-by-Section Analysis)
Both the ITAA and the ITIC commented that defining undue burden was beyond the Board's authority....
-
106 Definitions
Various defined terms and definitions have been revised, removed, or added in the final rule....
-
SEAT HEIGHT MEASUREMENT DETAIL
Lower parts of the transfer surface (such as the front edge) would have an even lower height. For reference, ¾ inches is a typical bolster height used on many examination tables....
-
406.6 Diagonal Curb Ramps
Diagonal or corner type curb ramps with returned curbs or other well-defined edges shall have the edges parallel to the direction of pedestrian flow....
- Neo-Metro Commercial Wall Mounted Neo-Basin 8935 Series
- Greenfields Outdoor Fitness Two-Person Accessible Combo Butterfly and Reverse Fly GR2005-1-48E-W (2 Configurations)
- Ultratec Supercom 4400 TTY
- Inclusion Solutions CONNECT Emergency Management Plan
- Federal Relay Service
-
T703.1 General
The symbol shall have a background field height of 4 inches (100 mm) minimum. The symbol and its background shall have a non-glare finish....
-
I. PURPOSE
This Agreement reaffirms and restates the SCDC's obligations to provide appropriate auxiliary aids and services whenever necessary to ensure effective communication with inmates who have...