Toilet compartment doors shall not swing into the minimum required compartment area....
Search Results "Swing Clear Hinge"
Filters
Commonly Searched Documents
-
11B-604.8.2.2 Doors
-
4.23.4 Water Closets
a standard toilet stall complying with 4.17; where 6 or more stalls are provided, in addition to the stall complying with 4.17.3, at least one stall 36 in (915 mm) wide with an outward swinging...
-
4.22.4 Water Closets
a standard toilet stall complying with 4.17; where 6 or more stalls are provided, in addition to the stall complying with 4.17.3, at least one stall 36 in (915 mm) wide with an outward swinging...
-
11B-405.7.4 Change in direction
Ramps that change direction between runs at landings shall have a clear landing 60 inches (1525 mm) minimum by 72 inches (1829 mm) minimum in the direction of downward travel from the upper...
-
Allegion Falcon SC70 Series Surface Mounted Door Control
Specifications Meets ANSI A117.1 ANSI/BHMA A 156.4, Grade 1 UL Listed 1 1/2" diameter piston Closer mounts hinge side, tob jamp or parallel arm...
-
Allegion Falcon SC80 Series Surface Mounted Door Control
Specifications Meets ANSI A117.1 ANSI/BHMA A156.4, Grade 1 UL Listed 1 1/4" diameter piston Closer mounts hinge side, top jamb or parallel arm...
-
T-Shaped Space: ADA Standard Section 304.3.2
Section 304.3.2 covers the current ADA Standards for t-shaped turning space.
-
Figure 404.2.4.1(k) Maneuvering Clearances at Manual Swinging Doors and Gates: Latch Approach, Push Side with Closer – Drawing from the U.S. Access Board
-
Figure 404.2.4.1(i) Maneuvering Clearances at Manual Swinging Doors and Gates: Latch Approach, Pull Side with Closer – Drawing from the U.S. Access Board
-
Environmental Health Network
We have organized clothing exchanges, holiday dinners, film screenings, and even salsa and swing dance lessons....
-
1134A.2 Number of complying bathrooms
A minimum 18-inch (457 mm) clear maneuvering space shall be provided on the swing side of the door at the strike edge of the door. 9. ...
-
1134A.2 Number of complying bathrooms
A minimum 18-inch (457 mm) clear maneuvering space shall be provided on the swing side of the door at the strike edge of the door. 9....
-
Common Problems with Toilet Rooms
Doors may not swing into the clear floor space required at toilet room fixtures, such as sinks and toilets....
-
Just Manufacturing Classroom Concealed Ledgemount Teardrop Handle Faucet
Classroom faucets feature rigid spouts, or restricted swing spouts, providing preventative measures against wet counter tops in the classroom....
-
Just Manufacturing Concealed Classroom Faucet with Triple Radius Spout
Spout swing restricted to 70 degrees. Triple radius swing spout with 10" clearance. Heavey cast spout cone for added strength. Replaceable seats....
-
AJW Architectural Products U126 40 oz. Vertical Liquid Soap Dispenser - Surface Mounted
Viewer: Clear plastic window allows a constant fluid level check. Concealed Mounting Plate: Fabricated of heavy gauge stainless steel....
-
11B-304.3.2 T-Shaped space
Each arm of the T shall be clear of obstructions 12 inches (305 mm) minimum in each direction and the base shall be clear of obstructions 24 inches (610 mm) minimum....
-
11B-1009.2.6 Footrests and armrests
The armrest positioned opposite the water shall be removable or shall fold clear of the seat when the seat is in the raised (load) position....
-
Length: ADA Standard Section 405.7.3
Section 405.7.3 covers the current ADA Standards for the required length of ramp landings.
-
11B-405.7.3 Length
The landing clear length shall be 60 inches (1524 mm) long minimum....
-
7. Commit to Ongoing Maintenance of Accessible Playground Surfaces as a Responsibility of Ownership
This will require the surface material to be raked level, filled and compacted so that the clear ground space is level in all directions for a safe transfer onto and off the equipment....
-
Width: ADA Standard Section 405.7.2
Section 405.7.2 covers the current ADA Standards for the required width of ramp landings.
-
11B-405.7.2 Width
The landing clear width shall be at least as wide as the widest ramp run leading to the landing....
-
4.30.6 Mounting Location and Height
Mounting location for such signage shall be so that a person may approach within 3 in (76 mm) of signage without encountering protruding objects or standing within the swing of a door....
