(2) If handrails are not continuous, they shall extend at least 12 in (305 mm) beyond the top and bottom of the ramp segment and shall be parallel with the floor or ground surface (see Fig...
Search Results "Practice Teeing Ground"
Filters
Commonly Searched Documents
-
4.8.5(2)
-
How to Use This Manual
The following chapters apply these legal requirements to specific employment practices and activities....
-
11B-704.2.1.2 Forward approach
Where a forward approach is provided at a telephone within an enclosure, the counter may extend beyond the face of the telephone 20 inches (508 mm) into the required clear floor or ground...
-
Issue: Self-Evaluation and Transition Plans
Common Problem: City governments often have not conducted thorough self-evaluations of their current facilities, programs, policies, and practices to determine what changes are necessary...
-
Additional Design Specifications for Requirement 1
In addition to the site impracticality determinations, the final Guidelines for Requirement 1 specify that an accessible entrance on an accessible route is practical when (1) there is an...
-
3. MINIMUMS, MAXIMUMS AND SPECIFYING AT THE LIMIT
MINIMUMS, MAXIMUMS AND SPECIFYING AT THE LIMIT: Where an element is to be installed at the minimum or maximum permitted dimension, such as "48 inches maximum", it is not good practice to...
-
1. Q: Does the Americans with Disabilities Act -- or "ADA" -- apply to child care centers?
A child care center's employment practices are covered by other parts of the ADA and are not addressed here....
-
11B-244.1 General
Religious practice may restrict general access to specific areas, for example a raised altar area; however access for persons with disabilities to these areas may be required....
-
11B-244.1 General
Religious practice may restrict general access to specific areas, for example a raised altar area; however access for persons with disabilities to these areas may be required....
-
11B-244.1 General
Religious practice may restrict general access to specific areas, for example a raised altar area; however access for persons with disabilities to these areas may be required....
-
Access to Health Care for People with Disabilities
Ethics Matters: A publication of the Donnelley Family Disability Ethics Program Access to Health Care for People with Disabilities © Rehabilitation Institute of Chicago 2009....
-
COORDINATION WITH SECTION 504 TRANSITION PLAN {35.150}
COORDINATION WITH SECTION 504 TRANSITION PLAN {35.150} New transition plans required only for policies and practices not included in previous transitions plans developed under section...
-
§ 37.125(h)
establish an administrative process to suspend, for a reasonable period of time, the provision of complementary paratransit service to ADA eligible individuals who establish a pattern or practice...
-
II-4.1000 General
Beginning January 26, 1992, title II prohibits all public entities, regardless of size of workforce, from discriminating in their employment practices against qualified individuals with...
-
306.3.1 General
Space under an element between 9 inches (230 mm) and 27 inches (685 mm) above the finish floor or ground shall be considered knee clearance and shall comply with 306.3....
-
306.3.1 General
Space under an element between 9 inches (230 mm) and 27 inches (685 mm) above the finish floor or ground shall be considered knee clearance and shall comply with 306.3....
-
1008.3.1.2 Height
The height of transfer platforms shall be 11 inches (280 mm) minimum and 18 inches (455 mm) maximum measured to the top of the surface from the ground or floor surface....
-
306.3.1 General
Space under an element between 9 inches (230 mm) and 27 inches (685 mm) above the finish floor or ground shall be considered knee clearance and shall comply with 306.3....
-
2. a. iii. Clear (Path-of-Travel) Floor Space
Access also includes how people will move into and around lobby and office reception areas, and determine the unobstructed floor or ground space to accommodate a wheelchair user....
-
306.3.1 General
Space under an element between 9 inches (230 mm) and 27 inches (685 mm) above the finish floor or ground shall be considered knee clearance and shall comply with 306.3. ...
-
4.15.2* SPOUT HEIGHT
Spouts shall be no higher than 36 in (915 mm), measured from the floor or ground surfaces to the spout outlet (see Fig. 27(a))....
-
1.2 Background
truncated domes as used in the U.S. are only one of several types of tactile patterns used through the world as detectable warnings, and represent only a subset of the types of Tactile Ground...
-
11B-404.2.10 Door and gate surfaces
Swinging door and gate surfaces within 10 inches (254 mm) of the finish floor or ground measured vertically shall have a smooth surface on the push side extending the full width of the door...