[ADA Standards § 4.8.2] Yes No Note: For existing ramps, the slope may be 1:10 for a 6-inch rise and 1:8 for a 3-inch rise in special circumstances (see ADA Standards § 4.1.6...
Search Results "1991 Standards"
2010 ADA Definition
1991 Standards: From 2010 Title II Regulations section 35.104 & 2010 Title III Regulations section 36.104: Requirements set forth in the ADA Standards for Accessible Design, originally published on July 26, 1991, and republished as Appendix D to this part.
-
f-i
-
§100.60(b)(4)
(4) Using different qualification criteria or applications, or sale or rental standards or procedures, such as income standards, application requirements, application fees, credit analysis...
-
Classroom Acoustics
At the Board’s urging, ASA committed to a two-year time frame for the completion of standards....
-
3.3.3 Clear Floor Width
The BS8300 standard’s developers may have added 100 mm to provide additional maneuvering room at clear floor areas....
-
"Housing at a Place of Education" definition
Place of Education,’’ and has revised Sec. 36.406(e) to reflect the accessible features that now will be required in addition to the requirements set forth under the transient lodging standards...
-
L. Accessible Guest Rooms
Accessible Guest Rooms (1) Defendants will have 12 designated accessible rooms/ suites that comply with the 2010 Standards dispersed among the various classes of accommodations as follows...
-
3.3.6 Knee Clearance Height, minimum
The U.S. standard for knee clearance height is 685 mm (27 in.). The U.K....
-
PURPOSE AND LEGAL AUTHORITY
We are proposing to update our existing Electronic and Information Technology Accessibility Standards under section 508 of the Rehabilitation Act of 1973, (“508 Standards”), as well as our...
-
The Long-Term Impact of Coastal Climates on Asphalt Materials
Properties situated near coastal environments face a highly unique set of atmospheric challenges that accelerate the physical degradation of standard residential construction materials....
-
Section 1193.51 Compatibility [1193.41 in the NPRM] (Section-by-Section Analysis)
electronic text format on a cross-industry standard port....
-
502.3.3 Values (Section-by-Section Analysis)
An express requirement for values to be set programmatically would be new to the 508 Standards....
-
Toilet Rooms South (Briefing Theater)
See Standards § 4.13.11(2)(b). kk. The men's and women's toilet room stall door hardware requires tight grasping and twisting of the wrist. See Standards § 4.13.9. ll....
-
Table 1
Proposed Guidelines Contain Same Requirements as in DOJ 2010 Standards Table 1 analyzes requirements in the proposed guidelines that are the same as requirements in the DOJ 2010 Standards...
-
Accessible Surfaces Located In The Use Zone
Ground surfaces must be inspected and maintained regularly and frequently to ensure continued compliance with the ASTM F 1951-99 standard....
-
15(e)
subparagraph 15(a), HWI shall ensure that each Post-1993 Owned Hotel and Post-1993 Joint Venture Hotel has the required number of rooms for guests with hearing impairments, as set forth in ADA Standards...
-
12112(b)(6)
(6) using qualification standards, employment tests or other selection criteria that screen out or tend to screen out an individual with a disability or a class of individuals with disabilities...
-
§ 36.304(d)(3)(i)
(i) In addition to the provisions of section 240.2.1 of the proposed standards, where an existing play area provides elevated play components, an additional number of ground level play components...
-
g-iii
Is there clear maneuvering floor space in front of each accessible door (see ADA Standards § Fig. 25) and, on the pull side, is there at least 18 inches clear floor space beyond the latch...
-
12112(b)(6)
(6) using qualification standards, employment tests or other selection criteria that screen out or tend to screen out an individual with a disability or a class of individuals with disabilities...
-
1.1.9 Effective date of this code
Only those standards approved by the California Building Standards Commission that are effective at the time an application for building permit is submitted shall apply to the plans and...
-
E101.3 Conventional Industry Tolerances (Section-by-Section Analysis)
This proposed provision would be new to the 508 Standards and would clarify how dimensions are to be interpreted when specified in the text or a referenced standard....
-
Residential Dwelling Units for Sale: ADA Standard Section 233.3.2
Section 233.3.2 covers scoping requirements in the current ADA Standards for residential dwelling units for sale.
-
1129B.3, Item 2
[1991 ADAAG] 4.1.2 Accessible Sites and Exterior Facilities: New Construction. ...