For paratransit services, a passenger's request for the driver to open an exterior entry door to a building to provide boarding and/or alighting assistance to a passenger with a disability...
Search Results "Sloped Entry"
-
16. Opening Building Doors
-
BACKGROUND
Although Defendants deny liability for any violation of Title III of the ADA with respect to the Hotel, they have consented to the entry of this Consent Decree without trial or adjudication...
-
9. Release of Claims
Released Claims Up to the Commencement of the Compliance Period Effective upon the entry of Judgment by the District Court, Plaintiffs and the Settlement Class members (and their respective...
-
Trash, Recycling, and Other Essential Containers
The slope of the clear space must not be steeper than 1:48 (2 percent) in any direction....
-
11B-307.3 Post-mounted objects
Exception: The sloping portions of handrails serving stairs and ramps shall not be required to comply with Section 11B-307.3....
-
Constructed Features in Recreation Sites
If constructed features are replaced, but the ground under the feature isn't changed, the surface and slope of the ground under the feature doesn't have to be brought into conformance with...
-
Curb Ramps
If a curb ramp is located where pedestrians must walk across the ramp, or where it is not protected by handrails or guardrails, it shall have flared sides; the maximum slope of the flare...
-
11B-307.3 Post-mounted objects
Exception: The sloping portions of handrails serving stairs and ramps shall not be required to comply with Section 11B-307.3. ...
-
11B-307.3 Post-mounted objects
Exception: The sloping portions of handrails serving stairs and ramps shall not be required to comply with Section 11B-307.3....
-
202.6.1
Such measures include but are not limited to providing a ramp with a steeper slope or widening a doorway to a narrower width than that mandated by the alterations requirements....
-
406.7 Islands
Each 48 inch (1220 mm) minimum by 36 inch (915 mm) minimum area shall be oriented so that the 48 inch (1220 mm) minimum length is in the direction of the running slope of the curb ramp it...
-
307.3 Post-Mounted Objects
EXCEPTION: The sloping portions of handrails serving stairs and ramps shall not be required to comply with 307.3....
-
Section E: Route from Entrance
(§303.3) E6 Is the running slope of part of the route greater than 1:20?...
-
Issue 14: Inspection of contractor’s work - Beware of field changes!
Note shifting slopes and cross slopes on the ramps in addition to poor APS location. ...
-
1. Access Barrier Removal in Existing Pedestrian Facilities
uneven pavement in the pedestrian rights of way; (5) repair of vertical or horizontal displacement or upheaval of the sidewalk or crosswalk surfaces; (6) correction of non-compliant cross-slopes...
-
Clear Width of Circulation Paths and Maneuvering Clearances at Wheelchair Spaces
wheelchair spaces) or 12 inches (for side entry wheelchair spaces) when wheelchair spaces are confined on three sides....
-
Camping Units
Do not allow the slope of the ground surface in camp living areas to exceed 1:48 (2 percent) in any direction, except when the surface is unpaved or is not built with boards....
-
Sargent HC 8800 Rim Exit Device
"Anti-walk" latchbolt design eliminiates the need for guarded latchbolt Withstands over 5 times ANSI/BHMA A156.3 2008 grade 1 standards for static load test simulating forced entry...
-
Changes in Level within a Dwelling Unit
The Department, however, does require that design features, such as a split-level entry, which is critical to providing an accessible route into and through the unit, must provide a ramp...
-
Gameplay: Simple Premise, Hilariously Tricky Execution
Navigate a series of increasingly ludicrous tracks filled with impossible jumps, precarious ramps, and physics-defying slopes. Sounds easy, right? Wrong....
-
Behavioral Safety Products #DH410 Cylindrical Ligature Resistant Lever Handle
The escutcheon plate is sloped at a low profile, from the door to the lever handle itself, to eliminate any further ligature points, and maintains extremely tight tolerances. ...
-
Salsbury Industries 62000 Series Double Tier 3 Wide Standard Metal Lockers
combination or key locks and combination or key padlocks Salsbury Industries is an ISO 9001: 2008 certified company and has excelled in the field of manufacturing since 1936 Options Sloping...
-
Salsbury Industries 63000 Series Triple Tier 3 Wide Standard Metal Lockers
combination or key locks and combination or key padlocks Salsbury Industries is an ISO 9001: 2008 certified company and has excelled in the field of manufacturing since 1936 Options Sloping...
-
Salsbury Industries 62000 Series Double Tier 1 Wide Standard Metal Lockers
combination or key locks and combination or key padlocks Salsbury Industries is an ISO 9001: 2008 certified company and has excelled in the field of manufacturing since 1936 Options Sloping...
