Section 206.5.1 covers scoping requirements in the most current ADA Standards for the use of platform lifts due to existing site constraints.
Search Results "Assurances from Contractors"
Filters
Commonly Searched Documents
-
Existing Site Constraints: ADA Standard Section 206.7.5
-
11B-1008.3 Transfer systems
Designers should minimize the distance between the points where a child transfers from a wheelchair or mobility device and where the elevated play components are located....
-
11B-1005.3 Edge protection
Edge protection will prevent wheelchairs or other mobility devices from slipping off the fishing pier or platform....
-
11B-703.7.2.6.3 Unisex toilet and bathing facilities
The vertices of the triangle shall be located ¼ inch (6.4 mm) maximum from the edge of the circle....
-
11B-904.6 Security glazing
Where counters or teller windows have security glazing to separate personnel from the public, a method to facilitate voice communication shall be provided....
-
11B-608.5.3 Alternate roll-in type shower compartments
compartments, operable parts of controls and faucets shall be installed on the side wall of the compartment adjacent to the seat wall 19 inches (483 mm) minimum and 27 inches (686 mm) maximum from...
-
k) Self-Evaluation/Transition Plan
At best, Kirola has presented only bare and conclusory allegations of injury resulting from the City's failure to develop and implement a self-evaluation or transition plan....
-
ADOPTION OF A 19 INCH HEIGHT MINIMIZES COSTS TO HEALTH CARE PROVIDERS
ADOPTION OF A 19 INCH HEIGHT MINIMIZES COSTS TO HEALTH CARE PROVIDERS In the absence of Committee consensus commending a departure from the existing broadly accepted transfer surface...
-
M301.2.3 Transfer Sides
M301.2.3 Transfer Sides Proposed requirement: The transfer surface shall be located to provide options to transfer from a mobility device onto one short side (depth) and one long side...
-
Stories of Emergency Use of Mobile Devices
From: Emergency Management last accessed 04.16.15 “A software developer in Falls Church, Virginia, for example, created the free 911HelpSMS app, which informs a user of where he is located...
-
11B-608.5.3 Alternate roll-in type shower compartments
compartments, operable parts of controls and faucets shall be installed on the side wall of the compartment adjacent to the seat wall 19 inches (483 mm) minimum and 27 inches (686 mm) maximum from...
-
Section 36.208(b) Direct Threat (Section-by-Section Analysis)
However, that reference was removed from the section when, for editorial purposes, the Department removed the definition of ‘‘direct threat'' from § 36.208 and placed it in § 36.104....
-
Accessible Meeting Location
Minimum requirements for an accessible temporary event include the following accessible elements: parking; route to the building entrance from accessible parking spaces, drop-off areas and...
-
903.4 Back Support
Back support shall be 42 inches (1065 mm) long minimum and shall extend from a point 2 inches (51 mm) maximum above the seat surface to a point 18 inches (455 mm) minimum above the seat...
-
11B-407.2.1.3 Clear floor or ground space
floor or ground space required at elevator call buttons must remain free of obstructions including ashtrays, plants, and other decorative elements that prevent wheelchair users and others from...
-
Parking Signage
This exception is intended to mitigate the impact of a reserved space in very small lots and stems from model building codes....
-
Can People Who are Blind or Have Low Vision Use the Circulation Path by Themselves?
An area of refuge serves as a temporary haven from the effects of a fire or other emergency....
-
1003.2.13 Accessible means of egress
Where more than one means of egress is required by Sections 1004.2.1 or 1005.2 from any accessible space, each accessible portion of the space shall be served by not less than two accessible...
-
g) New Construction and Alterations
and procedures regarding new construction and alterations . . . do not require a close-out inspection for compliance with federal disability access design standards or specific sign-off from...
-
5.2.3 Transfer Surface Measurement Recommendation for M301 and M302
The Committee recommends measuring the transfer surface from the center-point of each side of the transfer surface....
-
1003.2.13.2 Enclosed stairways
egress, shall have a clear width of 48 inches (1219 mm) minimum between handrails and shall either incorporate an area of refuge within an enlarged floor-level landing or shall be accessed from...
-
703.4.1 Height above Finish Floor or Ground
Tactile characters on signs shall be located 48 inches (1220 mm) minimum above the finish floor or ground surface, measured from the baseline of the lowest tactile character and 60 inches...
-
404.2.11 Vision Lights
EXCEPTION: Vision lights with the lowest part more than 66 inches (1675 mm) from the finish floor or ground shall not be required to comply with 404.2.11....
-
903.4 Back Support
Back support shall be 42 inches (1065 mm) long minimum and shall extend from a point 2 inches (51 mm) maximum above the seat surface to a point 18 inches (455 mm) minimum above the seat...